— When driving on winding or uneven
roads.
markers.)
SYSTEM TEMPORARILY UNAVAILABLE
Condition A:
— On roads where the traveling lane
merges or separates.
— When there is a lane closure due to
road repairs.
The warning and assist functions of the In-
telligent Lane Intervention system are not
designed to work under the following condi-
tions:
— When the vehicle’s traveling direction
does not align with the lane marker.
— When driving in a makeshift or tem-
porary lane.
— When traveling close to the vehicle in
front of you, which obstructs the lane
camera unit detection range.
— When driving on roads where the lane
width is too narrow.
.
When you operate the lane change signal
and change the traveling lanes in the
direction of the signal. (The Intelligent Lane
Intervention system will be deactivated for
— When driving without normal tire
conditions (for example, tire wear,
low tire pressure, installation of spare
tire, tire chains, non-standard
wheels).
— When rain, snow or dirt adheres to the
windshield in front of the lane cam-
era unit.
approximately
change signal is turned off.)
2
seconds after the lane
— When the headlights are not bright
due to dirt on the lens or if the aiming
is not adjusted properly.
.
When the vehicle speed lowers to less than
approximately 70 km/h (43 MPH).
— When the vehicle is equipped with
non-original brake parts or suspen-
sion parts.
After the above conditions have finished and
the necessary operating conditions are satis-
fied, the warning and assist functions will
resume.
— When strong light enters the lane
camera unit. (For example, the light
directly shines on the front of the
vehicle at sunrise or sunset.)
— When you are towing a trailer or other
vehicle (for Australia, New Zealand
and South Africa).
Condition B:
— When a sudden change in brightness
occurs. (For example, when the vehi-
cle enters or exits a tunnel or under a
bridge.)
The assist function of the Intelligent Lane
Intervention system is not designed to work
under the following conditions (warning is still
functional):
.
The system may not function properly
under the following conditions:
— On roads where there are multiple
parallel lane markers; lane markers
that are faded or not painted clearly;
yellow painted lane markers; non-
standard lane markers; or lane mar-
kers covered with water, dirt, snow,
etc.
.
Excessive noise will interfere with the
warning chime sound, and the chime
may not be heard.
.
.
When the brake pedal is depressed.
When the steering wheel is turned as far as
necessary for the vehicle to change lanes.
While the Intelligent Lane Intervention sys-
tem is operating, you may hear a sound of
brake operation. This is normal and indicates
that the Intelligent Lane Intervention system
is operating properly.
.
When the vehicle is accelerated during the
Intelligent Lane Intervention system opera-
tion.
— On roads where discontinued lane
markers are still detectable.
.
.
.
When the Intelligent Cruise Control (ICC)
approach warning occurs.
— On roads where there are sharp
curves.
When the hazard warning flashers are
operated.
— On roads where there are sharply
contrasting objects, such as sha-
dows, snow, water, wheel ruts, seams
or lines remaining after road repairs.
(The Intelligent Lane Intervention sys-
tem could detect these items as lane
When driving on a curve at high speed.
After the above conditions have finished and
the necessary operating conditions are satis-
fied, the Intelligent Lane Intervention system
application of the brakes will resume.
Starting and driving 5-47
English 
