PRACTICAL INFORMATION
Integrated direction indicator side
repeaters
Refit the lamp fixing nuts inside
the boot using the towing eye, if
necessary. When refitting, ensure
that the lamp unit is positioned and
fixed correctly.
CHANGING A REAR BULB
(SALOON)
Reconnect the electrical connector.
Number plate lamps: W5W.
Remove the transparent cover us-
ing a screwdriver blade.
Change the faulty bulb.
1. Direction indicators:
PY21W (amber).
Push the repeater forwards or
backwards and release it.
2. Reversing lamps: P21W.
3. Foglamps/sidelamps:
P21/4W.
4. Sidelamps: P21/4W.
5. Brake lamps/sidelamps: P21/4W.
Disconnect the electrical connector.
Unscrew the lamp fixing nuts in-
side the boot using the towing eye
(stored inside the spare wheel), if
necessary.
Remove the seal.
Unclip the bulb holder moving
aside the 5 tabs.
Unscrew the bulb and change it.
Refit the bulb holder.
Reposition the seal.
Unclip the repeater and change it.
Repeaters can be obtained from
PEUGEOT dealers.
Amber coloured bulbs (direction indi-
cators and side repeaters), must be
replaced with bulbs of identical speci-
fication and colour.
Third brake light:
Five W 5 W bulbs.
Remove the plastic cover carefully
by unclipping it at the centre and
on either side, perpendicular to its
direction of engagement.
Press on the two tabs located at
the rear, near the rear screen.
Pull the red transparent cover out-
wards while maintaining the pressure
on the tabs.
Change the faulty bulb.
When refitting, ensure that the
tabs of the red transparent cover
are engaged correctly and that the
upper trim has been put back in
place correctly.
117
English