PRACTICAL INFORMATION
The electrical system of your
vehicle is designed to oper-
ate with standard or optional
equipment.
CHANGING A WINDSCREEN
WIPER BLADE
ECONOMY MODE FUNCTION
After the engine has stopped, certain
electrical functions can be used for a
maximum duration of approximately
one hour, to prevent discharging of the
battery.
Before installing other electrical equip-
ment or accessories on your vehicle,
contact a PEUGEOT dealer.
PEUGEOT will not accept responsi-
bility for the cost incurred in repairing
your vehicle or for rectifying the mal-
functions resulting from the installation
of accessories not supplied and not
recommended by PEUGEOT and not
installed in accordance with its instruc-
tions, in particular when the combined
consumption of all of the additional
equipment connected exceeds 10 mil-
liamperes.
This period may be signifi-
cantly reduced if the battery
charge is low.
Once the hour is over, a message ap-
pears on the multi-function display
and the active functions are put on
standby.
These functions are automatically re-
activated when the vehicle is started.
The maxi-fuses provide additional pro-
tection for the electrical systems.All work
must be carried out by a PEUGEOT
dealer.
Placing the wiper blades in
the maintenance position
Less than one minute after swit-
ching off the ignition, press the
windscreen wiper stalk down once
to position the blades vertically on
the windscreen (maintenance po-
sition).
If the telephone is being used
when economy mode starts,
it will still be possible to finish
the call.
Replacing a blade
A flat battery prevents the en-
gine from starting.
Lift the arm, then unclip the blade
and remove it.
Fit the new blade and fold down
the arm.
As winter approaches, have your bat-
tery checked by a PEUGEOT dealer.
To reposition the blades, switch on the
ignition and operate the windscreen
wiper stalk.
123
English