Advertisement

Download User Manual App

Quickly access user manual for free!

app store
2004-2011 Peugeot 407 4 Door PRACTICAL INFORMATION -> ECONOMY MODE FUNCTION User Manual

MY CAR USER MANUAL

PRACTICAL INFORMATION -> ECONOMY MODE FUNCTION for Your Peugeot 407 4 Door First Generation (2004-2011)

PRACTICAL INFORMATION  
10  
The electrical system of your  
vehicle is designed to oper-  
ate with standard or optional  
equipment.  
CHANGING A WINDSCREEN  
WIPER BLADE  
ECONOMY MODE FUNCTION  
After the engine has stopped, certain  
electrical functions can be used for a  
maximum duration of approximately  
one hour, to prevent discharging of the  
battery.  
Before installing other electrical equip-  
ment or accessories on your vehicle,  
contact a PEUGEOT dealer.  
PEUGEOT will not accept responsi-  
bility for the cost incurred in repairing  
your vehicle or for rectifying the mal-  
functions resulting from the installation  
of accessories not supplied and not  
recommended by PEUGEOT and not  
installed in accordance with its instruc-  
tions, in particular when the combined  
consumption of all of the additional  
equipment connected exceeds 10 mil-  
liamperes.  
This period may be signifi-  
cantly reduced if the battery  
charge is low.  
Once the hour is over, a message ap-  
pears on the multi-function display  
and the active functions are put on  
standby.  
These functions are automatically re-  
activated when the vehicle is started.  
The maxi-fuses provide additional pro-  
tection for the electrical systems.All work  
must be carried out by a PEUGEOT  
dealer.  
Placing the wiper blades in  
the maintenance position  
Less than one minute after swit-  
ching off the ignition, press the  
windscreen wiper stalk down once  
to position the blades vertically on  
the windscreen (maintenance po-  
sition).  
If the telephone is being used  
when economy mode starts,  
it will still be possible to finish  
the call.  
Replacing a blade  
A flat battery prevents the en-  
gine from starting.  
Lift the arm, then unclip the blade  
and remove it.  
Fit the new blade and fold down  
the arm.  
As winter approaches, have your bat-  
tery checked by a PEUGEOT dealer.  
To reposition the blades, switch on the  
ignition and operate the windscreen  
wiper stalk.  
123  
PRACTICAL INFORMATION  
10  
Engine compartment fuses  
Rating  
A
Fuse N°  
Functions  
To access the fuses located in the  
engine compartment (next to the bat-  
tery), remove the battery cover and  
unclip the fuse box cover.  
Close the fuse box cover carefully and  
refit the battery cover when you have  
finished.  
1
2
3
4
20  
15  
10  
20  
Engine management control unit.  
Horn.  
Front and rear wash-wipe.  
Headlamp wash.  
Engine management actuators (fuel pump,  
purge canister solenoid valves, ...).  
5
6
15  
10  
Automatic gearbox control unit.  
Switching and protection unit, intake air flow  
sensor, clutch switch, six-speed automatic gear-  
box switch, STOP switches, electrochromatic  
mirror, panoramic roof concealing flap controls  
(407SW).  
7
10  
8
9
20  
10  
Starter coil.  
Xenon bulb electronic supply, STOP switch,  
power steering electropump assembly, four-  
speed automatic gearbox control unit, automatic  
gearbox locking relay.  
Engine management actuators (ignition coil,  
solenoid valves, oxygen sensors).  
10  
30  
11  
12  
40  
30  
Air conditioning blower or not used.  
Windscreen wipers.  
13  
14  
40  
30  
Built-in systems interface supply (ignition positive).  
Air pump.  
122  
PRACTICAL INFORMATION  
10  
The electrical system of your  
vehicle is designed to oper-  
ate with standard or optional  
equipment.  
CHANGING A WINDSCREEN  
WIPER BLADE  
ECONOMY MODE FUNCTION  
After the engine has stopped, certain  
electrical functions can be used for a  
maximum duration of approximately  
one hour, to prevent discharging of the  
battery.  
Before installing other electrical equip-  
ment or accessories on your vehicle,  
contact a PEUGEOT dealer.  
PEUGEOT will not accept responsi-  
bility for the cost incurred in repairing  
your vehicle or for rectifying the mal-  
functions resulting from the installation  
of accessories not supplied and not  
recommended by PEUGEOT and not  
installed in accordance with its instruc-  
tions, in particular when the combined  
consumption of all of the additional  
equipment connected exceeds 10 mil-  
liamperes.  
This period may be signifi-  
cantly reduced if the battery  
charge is low.  
Once the hour is over, a message ap-  
pears on the multi-function display  
and the active functions are put on  
standby.  
These functions are automatically re-  
activated when the vehicle is started.  
The maxi-fuses provide additional pro-  
tection for the electrical systems.All work  
must be carried out by a PEUGEOT  
dealer.  
Placing the wiper blades in  
the maintenance position  
Less than one minute after swit-  
ching off the ignition, press the  
windscreen wiper stalk down once  
to position the blades vertically on  
the windscreen (maintenance po-  
sition).  
If the telephone is being used  
when economy mode starts,  
it will still be possible to finish  
the call.  
Replacing a blade  
A flat battery prevents the en-  
gine from starting.  
Lift the arm, then unclip the blade  
and remove it.  
Fit the new blade and fold down  
the arm.  
As winter approaches, have your bat-  
tery checked by a PEUGEOT dealer.  
To reposition the blades, switch on the  
ignition and operate the windscreen  
wiper stalk.  
123  
PRACTICAL INFORMATION  
10  
The electrical system of your  
vehicle is designed to oper-  
ate with standard or optional  
equipment.  
CHANGING A WINDSCREEN  
WIPER BLADE  
ECONOMY MODE FUNCTION  
After the engine has stopped, certain  
electrical functions can be used for a  
maximum duration of approximately  
one hour, to prevent discharging of the  
battery.  
Before installing other electrical equip-  
ment or accessories on your vehicle,  
contact a PEUGEOT dealer.  
PEUGEOT will not accept responsi-  
bility for the cost incurred in repairing  
your vehicle or for rectifying the mal-  
functions resulting from the installation  
of accessories not supplied and not  
recommended by PEUGEOT and not  
installed in accordance with its instruc-  
tions, in particular when the combined  
consumption of all of the additional  
equipment connected exceeds 10 mil-  
liamperes.  
This period may be signifi-  
cantly reduced if the battery  
charge is low.  
Once the hour is over, a message ap-  
pears on the multi-function display  
and the active functions are put on  
standby.  
These functions are automatically re-  
activated when the vehicle is started.  
The maxi-fuses provide additional pro-  
tection for the electrical systems.All work  
must be carried out by a PEUGEOT  
dealer.  
Placing the wiper blades in  
the maintenance position  
Less than one minute after swit-  
ching off the ignition, press the  
windscreen wiper stalk down once  
to position the blades vertically on  
the windscreen (maintenance po-  
sition).  
If the telephone is being used  
when economy mode starts,  
it will still be possible to finish  
the call.  
Replacing a blade  
A flat battery prevents the en-  
gine from starting.  
Lift the arm, then unclip the blade  
and remove it.  
Fit the new blade and fold down  
the arm.  
As winter approaches, have your bat-  
tery checked by a PEUGEOT dealer.  
To reposition the blades, switch on the  
ignition and operate the windscreen  
wiper stalk.  
123  

Related Topics

PRACTICAL INFORMATION

CHANGING A WHEEL
SPECIAL FEATURES OF ALLOY WHEELS
VERY COLD CLIMATE SCREEN
CHANGING A FRONT BULB
CHANGING A REAR BULB (SALOON)
CHANGING A REAR BULB (407SW)
CHANGING A FUSE
CHANGING A WINDSCREEN WIPER BLADE
BATTERY (LOCATED IN THE ENGINE COMPARTMENT