Get READY TO SET OFF -> 6-speed electronic gearbox system Guide for Peugeot Partner Van 2008-2014

Gearbox and steering wheel

6-speed electronic gearbox

Moving off

-

To start the engine, the gear

selector must be in position N.

Press ﬁrmly on the brake pedal.

Operate the starter.

-

When the engine is running, place

the gear selector on R, A or M as

desired.

-

Release the brake pedal and

accelerate.

If the gear selector is not in position N,

and/or if the brake pedal is not

pressed, the engine will not start.

Repeat the above procedure.

Reverse gear

Engaging reverse gear

Mode selection

-

automatic mode: gear selector in

position A.

manual mode: gear selector in

position M.

Move the gear selector to R.

Only attempt to select reverse gear

when the vehicle is stationary.

Neutral

For safety:

It is only possible to come out

Changing to neutral

of position N if the brake pedal is

pressed.

The change from position A (driving in

automatic mode) to position M (driving

in manual mode) or vice versa can be

made at any time. The warning lamp A

goes off in the instrument panel.

Move the gear selector to N. If the

vehicle is moving, do not select this

position even momentarily.

Gearbox and steering wheel

Changing gear

Pull on the "+" control

paddle to change up.

Pull on the "-" control

paddle to change

down.

-

If the vehicle stops or reduces speed

(for example when approaching a

stop sign), the gearbox changes

down automatically, to ﬁrst gear if

needed.

-

It is not necessary to release the

accelerator completely during gear

changes.

A gear change instruction is

accepted only if the engine speed

permits.

For safety reasons, depending on

the engine speed, a change down

may be performed automatically.

Automatic mode

Manual mode

Changing to manual mode

Changing to automatic

mode

Move the gear selector to A.

Move the gear selector to M.

The gearbox then operates in

automatic mode, without any action on

your part.

It constantly selects the gear that is

best suited to the following conditions:

In situations of high engine speeds

(heavy acceleration), a change

up will not occur unless the driver

-

driving style,

road proﬁle,

optimum fuel consumption.

operates the electronic gearbox control

paddle.

2

Gearbox and steering wheel

Acceleration

For optimum acceleration (e.g. to

overtake another vehicle), simply

press the pedal beyond the point of

resistance at the end of its travel,

by pressing down ﬁrmly.

Vehicle stationary,

with the engine running

In the event of a prolonged stop with

the engine running, the gearbox

changes automatically to neutral N.

Stopping the vehicle

Before stopping the engine, put the

gear selector in position N.

STEERING WHEEL ADJUSTMENT

In all cases, it is essential to apply

the parking brake. Check that the

parking brake warning lamp is on in the release the steering wheel adjustment

When the vehicle is stationary,

instrument panel.

mechanism by pulling the lever.

Adjust the steering wheel for height

and reach, then lock the mechanism by

pushing the lever fully forwards.

Before doing anything in the

engine compartment, check that

the gear selector is in neutral N.

Download User Manual App

READY TO SET OFF -> 6-speed electronic gearbox system for Your Peugeot Partner Van 2008-2014

Related Topics

READY TO SET OFF

Popular Owner Manuals

Latest Owner Manuals