Access
REAR ROOF FLAP
-
lower the black paddle to secure
the rear roof flap.
The side supports can be used as
hooking points.
This rear roof flap is only compatible
with the hinged doors.
To open the rear roof flap:
Securing the rear roof flap places it
on the seal correctly and guarantees
sealing without noise.
-
-
raise the black paddle of the toggle,
The rear bumper has been
reinforced to serve as a footrest
when entering the vehicle.
relieve the toggle by pressing the
rear roof flap (downwards) then
release the hook,
Support bar
A support bar is provided for
transporting long loads, after opening
the rear roof flap.
Fold back the support bar by lifting
the lever.
Support it to the door pillar.
-
-
lift the rear roof flap,
Never drive without the support
bar in place.
The rear doors only lock when the
support bar is installed.
pass the point of resistance to
secure the rear roof flap using the
support struts.
When the rear roof flap is open, take
care when driving where height is
restricted.
Never rest loads directly on the rear
doors.
Support the long loads to be
transported, lift them and reposition
the support bar with one hand.
Ensure that it is secured correctly by
pressing the handle downwards past
the point of resistance and secure the
loads firmly.
To close the rear roof flap:
-
check that the support bar is
secured correctly,
lower the rear roof flap,
-
-
while pressing the rear roof flap
(downwards), take hold of the
two loops of the spring then place
the hook in its housing,
Comply with the usual indications, to
warn other drivers.
English 
