HALOGEN HEADLIGHTS: changing bulbs
A
Dipped beam/main beam
headlights
Remove cover B or C.
Unclip connector 1 or 4 from the bulb
concerned.
Release the spring.
1
2
Remove bulb 2 or bulb 3.
C
B
Bulb type: only use anti UV 55W bulbs
to ensure the plastic glass on the head-
lights is not damaged.
4
3
2 → H7
3 → H1 or H7
Do not touch the bulb glass. Hold it
by its base.
However, because the protective covers
need to be removed, you are advised
to have your bulbs replaced by an
approved dealer.
Direction indicator lights
Turn bulb holder A a quarter of a turn
and take out the bulb.
Mark the bulb’s position before removal
to ensure correct positioning when re-
placing.
Bulb type: orange PY21 W.
Once the bulb has been replaced,
check that it is properly secured.
When the bulb has been changed,
make sure you refit the cover correctly.
To comply with local legislation, or
as a precaution, you can obtain an
emergency kit containing a set of
spare bulbs and fuses from an ap-
proved dealer.
The engine may be hot
when carrying out opera-
tions in close proximity. In
addition, the engine cooling
fan can come on at any moment.
The bulbs are under pres-
sure and can break when
replaced.
Risk of injury.
Risk of injury.
5.15
English 
