TYRE INFLATION KIT (continued)
Affix the driving recommendation label
to the dashboard where it can easily be
seen by the driver;
Precautions when using the
kit
The kit should not be operated for more
than 15 consecutive minutes.
Put the kit away.
Start driving immediately, and after 6
miles (10 kilometres) or 10 minutes of
driving, stop to check the tyre pressure.
If it is above 1.3 bar, adjust it to the rec-
ommended pressure (refer to the infor-
mation on “Tyre pressures”), otherwise
contact an approved dealer: repair is
not possible.
3
Nothing should be placed
around the driver’s feet
as such objects may slide
under the pedals during
sudden braking manoeuvres and
obstruct their use.
5
7
6
– adjust the pressure: to increase
it, continue inflation with the kit, to
reduce it, press button 7 located on
the inflation adapter.
Following repair with the kit,
do not travel further than
120 miles (200 km). In addi-
tion, reduce your speed and
under no circumstances exceed
48 mph (80 km/h). The sticker, which
you must affix in a prominent posi-
tion on the dashboard, reminds you
of this.
If the correct pressure cannot be
achieved, repair is impossible. Do
not drive the vehicle. Consult an ap-
proved dealer.
Please be aware that a
poorly tightened or miss-
ing valve cap can make the
tyres less airtight and may
lead to pressure loss.
Once the tyre is correctly inflated,
remove the kit: slowly unscrew the in-
flation adapter 6 to prevent any repair
product from escaping and screw the
hose to the bottle opening to prevent
the product from escaping.
Depending on the country or local
legislation, a tyre repaired with the
inflation kit will need to be replaced.
Always use valve caps identical to
those fitted originally and tighten
them fully.
5.8
English 
