WHEEL TRIMS - WHEEL
1
D
4
B
C
3
6
5
A
2
Hubcap (example hubcap 1)
Central wheel hubcap
(example: hubcap 4)
To remove it, insert the hubcap tool 6
(located in the tool kit) into recess 5.
Remove the wheel trim using hubcap
tool 2 (located in the tool kit) by engag-
ing the hook in the opening near
valve 3.
To refit it, position it in line with recess 5
and tighten it with tool 6.
To refit it, align it with valve 3. Push the
retaining hooks in fully, starting with
side A near the valve, followed by B
and C, finishing at D opposite the
valve.
We would advise you to note down
the number engraved on the tool so
that you can replace it if it is lost.
5.10
English 
