TOOL KIT
Wheelbrace 3
This is used to tighten or release the
wheel bolts.
3
5
End piece for special wheel
bolt 4
(depending on vehicle)
4
1
8
2
Towing hitch 5
Refer to the information on “Towing” in
Section 5.
A
6
7
Hubcap tool 6 or 7
This tool is used to remove the wheel
trims.
The tool kit A is located in the emer-
gency spare wheel winch tray.
To access the tools, remove the lug-
gage compartment carpet(s) (depend-
ing on the vehicle). Lift the cover and
remove it.
Storage compartment 1
This is for storing a box of bulbs.
Jack 8
Remove jack 8.
To refit, lower the jack fully and unscrew
it by one turn of the handle to store it.
Storage compartment 2
This is for storing a lock nut.
Take out the tool kit, lifting it at both
ends.
To return it, proceed in the reverse
order to removal.
Do not leave the tools unsecured inside the vehicle as they may come loose under braking. After use, check that all the
tools are correctly clipped into the tool kit, then position it correctly in its housing: there is a risk of injury.
If wheel bolts are supplied in the tool kit, only use these bolts for the emergency spare wheel: refer to the label affixed
to the emergency spare wheel.
The jack is designed for wheel changing purposes only. Under no circumstances should it be used for carrying out repairs un-
derneath the vehicle or to gain access to the underside of the vehicle.
5.9
English 
