REVERSING CAMERA (2/3)
Operating faults
2
When reverse gear is engaged, if the
system detects an operating fault, a
black screen is displayed temporarily
The screen shows a reverse mirror
on the multimedia screen 2.
image.
This may be caused by a fault affecting
The frames are a representation
the camera or screen (clearness, fixed
projected on a flat surface. This in-
image, delayed communication etc.).
formation is to not be taken into ac-
If the temporary display of the black
count when superimposed on a
screen persists, please consult an ap-
vertical object or an object on the
proved dealer.
ground.
Objects which appear on the edge
of the screen may be deformed.
In very bright light (snow, vehicle in
Activating, deactivating the
sunshine, etc.), the camera vision
reversing camera
may be adversely affected.
To activate or deactivate the function
If the boot is open or poorly closed,
from the multimedia screen 2, refer to
the message “WARNING: Boot
the multimedia instructions.
Open” appears and the camera dis-
play disappears.
Activate or deactivate the reversing
camera and confirm your choice.
You can also adjust the camera image
settings (brightness, contrast, etc.).
This function is an additional aid.
It cannot, therefore, under any circumstances replace the vigilance or the
responsibility of the driver.
The driver should always be ready for sudden incidents while driving: always
ensure that there are no small, narrow moving obstacles (such as a child, animal,
pushchair, bicycle, stone, post, etc.) in the blind spot when manoeuvring.
2.139
English 
