2014-2018 Renault Clio 4 Door Driving -> Speed limiter User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driving -> Speed limiter for Your Renault Clio 4 Door Fourth Generation (2014-2018)

SPEED LIMITER (1/4)
Controls
1 Speed limiter On/Off switch.
2 Cruise control On/Off switch.
3 Speed limiter activation and speed
reduction (SET/-).
4 Speed limiter activation and speed
increase or recall of memorised limit
5
speed (RES/+).
1
4
5 Speed limiter function standby (with
limited speed memory) (O).
3
2
The speed limiter function helps you
stay within the driving speed limit that
you choose, known as the limit speed.
You can link the speed limiter to
the “Road sign detection” function.
➥ 2.88.
2.92
SPEED LIMITER (2/4)
7
7
1
4
3
Driving
Switching on
To store the current speed, press the 4
switch (RES/+) or the 3 switch (SET/- ):
When a limit speed has been set but
Press switch 1. The 7 warning light ap-
the limit speed replaces the dashes
not yet reached, driving is similar to
pears in grey. The “Speed limiter ON”
and, depending on the vehicle, the 7
driving a vehicle without the speed lim-
message appears on the instrument
warning light appears in white.
iter function.
panel accompanied by dashes to indi-
The minimum stored speed is 20 mph
cate that the speed limiter function is in
Once you have reached the stored
(30 km/h).
operation, waiting to store a limit speed.
speed, no effort on the accelera-
tor pedal will allow you to exceed
the programmed speed except in an
emergency (refer to information on
“Exceeding the limit speed”).
2.93
SPEED LIMITER (3/4)
Exceeding the limit speed
Limited speed cannot be maintained
When driving down a steep gradient,
It is possible to exceed the limit speed
the system may not maintain the limit
at any moment. To do this, press firmly
speed: the limit speed flashes in red
and fully the accelerator pedal (beyond
on the instrument panel and an audi-
the kickdown point).
ble signal sounds at regular intervals to
While the speed is being exceeded, the
inform you of this situation.
speed limiter flashes red on the instru-
ment panel. Then, release the accelera-
tor pedal: the speed limiter function will
return as soon as you reach a speed
4
lower than the memorised speed.
3
Varying the limit speed
The limit speed may be changed by
pressing repeatedly or holding down:
– switch 4 (RES/+) to increase speed;
– switch 3 (SET/-) to reduce speed.
If the speed limiter is not
available (after several at-
tempts to activate), contact
an approved dealer.
2.94
SPEED LIMITER (4/4)
7
7
5
1
4
3
2
Putting the function on
Switching off the function
standby
The speed limiter function is inter-
rupted:
The speed limiter function is suspended
when you press switch 5 (O). The limit
– when you press the 1 switch. In this
speed is stored and displayed in grey
case, the speed is no longer stored;
on the instrument panel.
– when you press the 2 switch. In this
case the cruise control is selected
Recalling the limit speed
and there is no stored speed.
If a speed has been stored, it can be re-
The warning light 7 disappears from
called by pressing the 4 switch.
the instrument panel to confirm that the
function is no longer active.
When the speed limiter is set to
standby, pressing the 3 switch
re-activates the function without
taking into account the memorised
speed: the speed at which the vehi-
cle is moving is taken into account.
2.95

Related Topics

Popular Owner Manuals