REAR SCREEN WASH/WIPE
Activating/deactivating the rear
screen wiper (depending on the vehi-
cle)
1
A
If your vehicle is fitted with a vehicle
settings customisation menu, it is pro-
grammed to activate the rear wipers
when reverse gear is selected (if the
windscreen wipers are on). You can
choose to activate or deactivate the
function. To do this, please refer to
“Vehicle settings customisation menu”
in Section 1, regarding the “Auto rear
wipe with reverse gear” function.
Check the condition of the wiper
blades. You are responsible for their
service life:
2
– they must remain clean: clean
the blades, windscreen and
rear screen regularly with soapy
water;
=
<
function activated;
function deactivated.
Rear screen wiper
With the ignition on, turn ring A
on stalk 1 to align the symbol with
mark 2 then release it.
To stop the operation, pivot ring A
again.
Y
– do not use them when the wind-
screen or rear screen are dry;
Rear screen wash/wipe
With the ignition on, push the
p
stalk.
– free them from the windscreen or
rear screen when they have not
been used for a long time.
Wiping frequency varies with vehicle
speed.
In all cases, replace them as soon
as they begin to lose efficiency: ap-
proximately once a year.
Before using the rear wiper, check
that no object obstructs the travel of
the blade.
Do not use the wiper arm to open or
close the tailgate.
Before any action involving the windscreen (washing the vehicle, deicing,
cleaning the windscreen, etc.) return stalk 1 to position A (park).
Risk of injury and/or damage.
1.85
English 
