Advice
2
–
–
Remove the 3 bolts ››› Fig. 190
to re-
Note
Changing the fog light bulbs
move the fog light.
Due to the difficulty of accessing fog light
bulbs, have them replaced at a Technical
Service or specialised workshop.
Front fog light bulb
Remove the metal clip situated on the up-
per part of the fog light by pulling towards
3
the exterior of the vehicle ››› Fig. 190
.
Remove the bulb holder
Fog light, FR version
Fig. 189 Front fog light.
Fig. 192 Front fog light.
Fig. 191 Fog light: access to the connector
and to the light bulb holder.
1
–
–
–
Remove connector ››› Fig. 192
from the
bulb.
A
–
–
Remove the 4 bolts
››› Fig. 191 from the
2
Turn the bulb holder ››› Fig. 192
to the
inside of the wheel housing and the 2 bot-
left and pull.
B
tom bolts
››› Fig. 191 from the bumper
with a screwdriver.
Remove the bulb by pressing on the bulb
holder and turning it counter-clockwise at
the same time.
Fig. 190 Front fog light.
Pull the bumper to release it from its an-
chorages to access the connector and the
light bulb holder.
1
–
–
Remove the bolt ››› Fig. 189
from the fog
–
–
Installation involves all of the above steps
in reverse sequence.
light grille with a screwdriver.
Subsequently, remove the clips located on
the edge of the grill with gentle leverage.
Check that the bulb works properly.
202
English 
