Advice
A
B
Side lights - Dipped beam/main beam.
Turn signal.
Dipped/main beam headlights
However, the edges may continue to be mis-
ted.
●
Please check at regular intervals that all
lighting (especially the exterior lighting) on
your vehicle is functioning properly. This is
not only in the interest of your own safety,
but also that of all other road users.
Turn signal bulb
●
Before changing a bulb, make sure you
have the correct new bulb.
●
Do not touch the glass part of the bulb with
your bare hands, use a cloth or paper towel
instead. The residue left by the fingerprints
would vaporise as a result of the heat gener-
ated by the bulb, they will be deposited on
the reflector and will impair its surface.
Fig. 176 Dipped beam/main beam of the sin-
gle headlight.
Fig. 175 Single turn signal lamp.
Single headlight bulb change
–
–
Raise the bonnet.
Single headlight bulbs
A
Turn bulb holder ››› Fig. 175
and pull.
to the left
–
–
Remove the bulb by pressing on the bulb
holder and turning it anti-clockwise at the
same time.
Fig. 177 Dipped beam/main beam of the sin-
gle headlight.
Installation involves all of the above steps
in reverse sequence.
–
–
Raise the bonnet.
1
Move the loop ››› Fig. 176
tion of the arrow and remove the cover.
in the direc-
2
–
Remove connector ››› Fig. 177
bulb.
from the
Fig. 174 Single headlight.
198
English 
