Advice
Changing bulbs. LED lamps
– Remove the failed bulb and replace with a
new bulb.
Number plate light
3 Applies to the model: IBIZA ST
Carry out the same operations as in lights fit-
ted with bulbs.
–
–
Insert the bulb holder in the turn signal
guide until it clicks into place.
If necessary, remove the socket, as if it were
a bulb.
First fit the turn signal in the opening in the
1
chassis, fastening the tabs
››› Fig. 202,
If the brake light and/or side light with LEDs
have to be replaced, the tail light must be re-
placed.
and then fit in the bulb as shown by the ar-
2
row
››› Fig. 202.
Number plate light
3 Applies to the model: IBIZA/IBIZA SC
Changing the side and interior
bulbs
Fig. 203 Remove the number plate light.
–
–
Insert the flat part of a screwdriver into the
special slot and remove the bulb.
–
–
–
Insert the flat part of a screwdriver into the
special slot and remove the number plate
light from its moulding.
Turn signals
Remove the bulb holder, by turning it until
it is free.
Remove the connector and extract the bulb.
After changing the bulb, fit the connector
again.
–
–
Change the bulb.
Replace the bulb holder, by turning it until
it fits fully.
Place the light in its moulding, pressing the
left side. Once it is fitted into place, press
the right side until you hear a click.
–
Fit the light into the space and press until
you hear a “click”.
Fig. 202 Turn signals.
–
–
Press the turn signal to the left or to the
right to remove the bulb.
Remove the bulb holder from the turn sig-
nal.
206
English 
