Fuses and bulbs
3
–
–
–
–
Unclip the retainer spring ››› Fig. 185
Remove the bulb by pressing on the bulb
holder and turning it anti-clockwise at the
same time.
WARNING
pressing inwards to the right.
This type of bulb should be changed at a spe-
cialised workshop.
Extract the bulb and fit the replacement so
that the lug on the base fits into the recess
on the reflector.
Installation involves all of the above steps
in reverse sequence.
–
–
Turn signal bulb
Fit the connector.
Fit the cover and close the strap. Make sure
that the gasket sits well on the casing cover
during the operation.
AFS headlight bulb change
AFS headlight bulbs
–
Check whether the new bulb is working.
Turn signal lamp
Fig. 188 Turn signal light.
–
–
Raise the bonnet.
A
Turn bulb holder ››› Fig. 188
and pull.
to the left
Fig. 187 AFS headlight bulbs.
–
–
Remove the bulb by pressing on the bulb
holder and turning it anti-clockwise at the
same time.
A
B
Turn signal lights
Xenon headlight (dipped beam/main
beam)
Fig. 186 Turn signal light.
Installation involves all of the above steps
in reverse sequence.
–
–
Raise the bonnet.
A
Turn bulb holder ››› Fig. 186
and pull.
to the left
Changing the xenon bulb
The procedure for changing the bulb is the
same on both sides of the vehicle.
201