Fuses and bulbs
–
–
Open the rear lid.
Changing bulbs
3 Applies to the model: IBIZA ST
Changing the tail light bulbs
(on the rear lid)
On the rear lid lining there is a lid behind
each light.
Overview of tail lights
3 Applies to the model: IBIZA ST
–
Remove the lid with a flat screwdriver, plac-
A
ing it in notch
››› Fig. 200.
Lights on the rear lid Bulb lamps
●
●
●
Changing bulbs
3 Applies to the model: IBIZA ST
Reverse lights
Side lights
Fog lights
Lights on the rear lid LED lamps
Fig. 199 Removing the bulb holder.
●
●
●
Reverse lights
Side light (LED)
Fog lights
–
Remove the bulb holder by pressing the
B
fastening clip
outwards.
››› Fig. 199 and pulling it
–
–
Replace the faulty bulb, rotating it to the
left and outwards.
Accessing the rear lid lights
3 Applies to the model: IBIZA ST
To refit follow the steps in reverse order,
taking special care when fitting the bulb
holder.
Fig. 201 Removing the bulb holder.
–
Remove the bulb holder by pressing the
B
fastening clips
outwards.
››› Fig. 201 and pulling
Changing bulbs. LED lamps
Carry out the same operations as in lights fit-
ted with bulbs.
–
–
Replace the faulty bulb, rotating it to the
left and outwards.
If necessary, remove the socket, as if it were
a bulb.
To refit follow the steps in reverse order,
taking special care when fitting the bulb
holder.
If the brake light and/or side light with LEDs
have to be replaced, the tail light must be re-
placed.
»
Fig. 200 Lights on the boot.
205
English 
