Get Keys and doors -> Disabling keyless access function Guide for Subaru XV SUV Second Generation (2017-2022)

2-12

Keys and doors/Keyless access with push-button start system

the remote keyless entry system

and push-button start system will not be

. To start the engine while the func-

available.

tions are disabled, perform the proce-

3 Lock or unlock the doors by using

dure described in <Starting engine=

the power door locking switch

To cancel the power save mode, press one

3 Open either of the front doors

of the buttons on the access key fob.

F9-18.

! Disabling functions

& Power saving function of ac-

& Disabling keyless access

S02AP0701

cess key fob

function

! By operating the access key fob

S02AP22

S02AP07

S02AP070102

This function stops the access key fob

If you have registered a PIN code for PIN

WARNING

from receiving signals and helps minimize

Code Access, you can disable the keyless

the battery consumption of the access key

access function by operating the access

If you wear an implanted pacemaker

fob.

key fob. For details about registering a PIN

or an implanted defibrillator, per-

code, refer to <Preparation for registering a

1. Press the < = button twice while hold-

form the procedure described in

PIN code= F2-10.

ing the < = button.

<By operating the driver9s door=

1. Open the driver9s door.

F2-13 to disable the keyless access

2. Rotate the lock lever toward the lock

function. If you perform the proce-

position.

dure described in <By operating the

access key fob= F2-12, the opera-

tion of an implanted pacemaker or

implanted defibrillator may be af-

fected by the radio waves from the

transmitter antenna.

When the vehicle is not going to be used

for a long time, or when you choose not to

use the keyless access function, the key-

less access function can be disabled.

LED indicator

NOTE

2. Confirm that the LED indicator blinks 4

. The locking and unlocking function

times to notify that the setting is complete.

by the remote keyless entry system is

3. Press and hold the < = button and < =

When the access key fob is in the power

not disabled.

button on the access key fob simulta-

save mode, the keyless access function

2-13

Keys and doors/Keyless access with push-button start system

neously for more than 5 seconds.

performed, push < = of the power door

tion was disabled.

locking switch twice while the door is open.

3 When disabling by operating the

A chirp sound will be heard, and the

driver9s door: a chirp will not be

7. Within 10 seconds after step 6 is

function will be disabled.

heard

performed, close and open the driver9s

door once.

! By operating the driver9s door

3 When disabling by operating the

access key fob: a chirp will be heard

S02AP070101

8. Within 5 seconds after step 7 is

1. Sit in the driver9s seat, and close the

performed, close the door.

door.

& Selecting audible signal op-

A chirp sound will be heard, and the

eration

functions will be disabled.

S02AP12

Using an electronic chirp, the system will

NOTE

give you an audible signal when the doors

lock and unlock. If desired, you may turn

In steps 4 and 6, press the power door

the audible signal off. For more details,

locking switch slowly. If the switch is

contact a SUBARU dealer.

pressed quickly, the functions may not

be disabled.

NOTE

For models with the combination meter

! Enabling functions

display (color LCD), the setting can be

S02AP0702

When the procedure to disable the func-

changed by operating the combination

tions is performed again, a chirp sound will

meter display (color LCD). For details,

be heard, and the functions are enabled.

refer to <Vehicle Setting= F3-41.

2. Push < = of the power door locking

NOTE

switch.

& Warning chimes and warning

. The keyless access function will be

3. Within 5 seconds after step 2 is

enabled only if you perform the proce-

indicator

performed, open the driver9s door.

dure in the same manner you disabled

S02AP06

The keyless access with push-button start

4. Within 5 seconds after step 3 is

the function (for example, when dis-

system sounds a warning chime and

performed, push < = of the power door

abling by operating the driver9s door,

flashes the access key warning indicator

locking switch twice while the door is open.

the function will not be enabled even if

on the combination meter in order to

5. Within 10 seconds after step 4 is

you operate the access key fob).

minimize improper operations and help

performed, close and open the driver9s

. Press the push-button ignition

protect your vehicle from theft.

door twice.

switch if you do not know the proce-

For details, refer to <Warning chimes and

6. Within 10 seconds after step 5 is

dure in which the keyless access func-

3 CONTINUED 3

Keys and doors -> Disabling keyless access function for Your Subaru XV SUV Second Generation (2017-2022)

Related Topics

Popular Owner Manuals

Latest Owner Manuals