2-27
Keys and doors/Alarm system
& If you have accidentally trig-
& Valet mode
seconds without releasing the switch. The
setting will then be changed as follows.
gered the alarm system
S02AF06
When you choose the valet mode, the
S02AF03
alarm system does not operate. In valet
. Type A combination meter
! To stop the alarm
mode, the remote transmitter is used only
S02AF0301
Do any of the following operations:
for locking and unlocking the doors and
Setting
Combination
Horn
status
meter display
. Press any button on the access key fob/
rear gate and panic activation.
remote transmitter.
Activate
ALon
Once
To enter the valet mode, change the
. Turn the ignition switch to the <ON=
Deactivate
ALoF
Twice
setting of your vehicle9s alarm system for
position (models without <keyless access
deactivation mode. Refer to <Alarm system
with push-button start system=).
. Type B combination meter
setting= F2-26. The security indicator light
. Turn the push-button ignition to the
will continue to flash once every 3 seconds
Setting
Combination
<ACC= position (models with <keyless
Horn
indicating that the system is in the valet
status
meter display
access with push-button start system=).
mode.
Activate
AL ON
Once
NOTE
To exit valet mode, change the setting of
Deactivate
AL OFF
Twice
Only registered keys will stop the
your vehicle9s alarm system for activation
NOTE
alarm. If the immobilizer transponder
mode. Refer to <Alarm system setting= F2-
is not registered, the alarm will not
26.
You may have the above setting change
stop.
done by your SUBARU dealer.
English 
