Get Keys and doors -> Locking and unlocking by holding the access key fob Guide for Subaru XV SUV Second Generation (2017-2022)

$2-6Keys and doors/Keyless access with push-button start systemreregistration of an access key fob,3 On the instrument panel! Operating rangescontact a SUBARU dealer.3 On the floorS02AP2001. For a spare access key fob, contact a3 Inside the glove boxSUBARU dealer.3 Inside the door trim pocket. Up to 7 access key fobs can be3 On the rear seatregistered for one vehicle.3 In the cargo area. Do not leave the access key fob inthe storage spaces inside the vehicle,If you do, the following situationssuch as the door pocket, dashboard,may the corner of the cargo area.3 The access key fob is mistakenlyVibrations may damage the key fob orlocked inside the on the switch, possibly resulting in3 A false warning issues althougha malfunction actually occurs.. After the vehicle battery is dis-3 No warning issues even whencharged or replaced, initialization ofany malfunction occurs.1)Antennathe steering lock system may be re-2)Operating range (approximately 16 to 32quired to start the engine. In this case,in (40 to 80 cm))& Locking and unlocking byperform the following procedure toholding the access key fobinitialize the steering lock.S02AP20(1) Turn the push-button ignitionWhen the access key fob is carried withinswitch to the <OFF= position. Forthe operating range, the doors and the reardetails, refer to <Switching powergate can be locked/unlocked just bystatus= the door handle.(2) Open and close the driver9sNOTEdoor.(3) Wait for approximately 10 sec-The vehicle can also be locked/ with the remote keyless entrysystem. For details, refer to <RemoteWhen the steering is locked, the initi-keyless entry system= is completed.. Do not leave the access key fob in1)LED indicatorthe following places.$

2-6

Keys and doors/Keyless access with push-button start system

reregistration of an access key fob,

3 On the instrument panel

! Operating ranges

contact a SUBARU dealer.

3 On the floor

S02AP2001

. For a spare access key fob, contact a

3 Inside the glove box

SUBARU dealer.

3 Inside the door trim pocket

. Up to 7 access key fobs can be

3 On the rear seat

registered for one vehicle.

3 In the cargo area

. Do not leave the access key fob in

the storage spaces inside the vehicle,

If you do, the following situations

such as the door pocket, dashboard,

may occur.

inside the corner of the cargo area.

3 The access key fob is mistakenly

Vibrations may damage the key fob or

locked inside the vehicle.

turn on the switch, possibly resulting in

3 A false warning issues although

a lockout.

no malfunction actually occurs.

. After the vehicle battery is dis-

3 No warning issues even when

charged or replaced, initialization of

any malfunction occurs.

Antenna

the steering lock system may be re-

Operating range (approximately 16 to 32

quired to start the engine. In this case,

in (40 to 80 cm))

& Locking and unlocking by

perform the following procedure to

holding the access key fob

initialize the steering lock.

S02AP20

(1) Turn the push-button ignition

When the access key fob is carried within

switch to the <OFF= position. For

the operating range, the doors and the rear

details, refer to <Switching power

gate can be locked/unlocked just by

status= F3-7.

touching the door handle.

(2) Open and close the driver9s

NOTE

door.

(3) Wait for approximately 10 sec-

The vehicle can also be locked/un-

onds.

locked with the remote keyless entry

system. For details, refer to <Remote

When the steering is locked, the initi-

keyless entry system= F2-17.

alization is completed.

. Do not leave the access key fob in

LED indicator

the following places.

2-7

Keys and doors/Keyless access with push-button start system

When the access key fob is within either of

function when the access key fob is

. Unlock and lock rear gate

the operating ranges of the front doors, the

inside the vehicle. However, depending

NOTE

LED indicator on the access key fob

on the status of the access key fob and

. It is not possible to lock the doors

flashes. When the keyless access func-

the environmental conditions, the ac-

and rear gate using the keyless access

tions are disabled, the LED indicator does

cess key fob may be locked inside the

function when the push-button ignition

not flash unless a button on the access key

vehicle. Before locking the vehicle,

switch is in the <ACC= or <ON= position.

fob is pressed.

make sure that you have the access

Refer to <Switching power status= F3-

key fob.

NOTE

. When the battery of the access key

. If the access key fob is placed too

. If the door handle is gripped with a

fob is discharged, or when operating it

close to the vehicle body, the keyless

gloved hand, the door lock may not be

in a location with strong radio waves or

access functions may not operate

released.

noise (e.g., near a radio tower, power

properly. If they do not operate prop-

. If the door lock sensor is touched

plant, broadcast station or an area

erly, repeat the operation from further

three times or more repeatedly, the

where wireless equipment is used), or

away.

system will ignore the sensor opera-

while talking on a cell phone, the

. If the access key fob is placed near

tion.

operating ranges may be reduced, or

the ground or in an elevated location

. When performing the locking proce-

the keyless access function may not

from the ground, even if it is in the

dure too quickly, locking may not have

operate.

indicated operating range, the keyless

been completed. After performing the

In such a case, perform the procedure

access function may not operate prop-

locking procedure, it is recommended

described in <Locking and unlocking=

erly.

to pull the REAR door handle to confirm

F9-17.

. When the access key fob is within

that the doors have been locked.

. The doors may lock or unlock when

the operating range, it is possible for

. If any of the doors (or the rear gate)

the car is being washed or exposed to a

anyone, even someone who is not

are not fully closed, the following will

significant amount of water that con-

carrying the access key fob, to operate

occur to alert you that the doors (or the

tacts the door handle while the key fob

the keyless access function. Note that

rear gate) are not properly closed.

is still in the operating range.

the keyless access function can be

3 an electronic chirp sounds five

! How to lock and unlock

operated only by the door handle, door

times.

S02AP2002

lock sensor, rear gate opener button or

It is possible to perform the following

3 the hazard warning flashers flash

rear lock button in the operating range

operations when you are carrying the

five times.

in which the access key fob is detected.

access key fob.

. It is possible to lock the doors even

. It is not possible to lock the doors

. Lock and unlock the doors

when one of the doors is open. After

and rear gate using the keyless access

3 CONTINUED 3

2-8

Keys and doors/Keyless access with push-button start system

performing the locking procedure,

! Locking with the door lock sensor

! Locking with the rear lock button

close the opened door or rear gate to

S02AP200201

S02AP200202

lock it.

. Within 3 seconds after locking the

doors and the rear gate by using the

keyless access function, it is not pos-

sible to unlock doors and/or the rear

gate by using the keyless access func-

tion.

. When locking, be sure to carry the

access key fob to prevent locking the

access key fob in the vehicle.

. The setting of the hazard warning

flasher operation and the volume of the

audible signal can be changed by your

Door lock sensor

Rear lock button

SUBARU dealer. Contact your SUBARU

Carry the access key fob, close all doors

dealer for details. Also, for models with

including the rear gate, and touch the door

including the rear gate and press the rear

the combination meter display (color

lock sensor on the door handle. All doors

lock button. The rear gate and all doors will

LCD), the setting of the hazard warning

including the rear gate will be locked. Also,

be locked. Also, an electronic chirp will

flasher operation can be changed by

an electronic chirp will sound once and the

sound once and the hazard warning

operating the combination meter dis-

hazard warning flashers will flash once.

flashers will flash once.

play (color LCD). For details, refer to

<Keyless Entry System= F3-41.

2-9

Keys and doors/Keyless access with push-button start system

! Unlocking

! Unlocking rear gate

! Door unlock selection function

S02AP2003

S02AP200203

S02AP200204

When the door is unlocked using the

keyless access function, only the doors

that were set can be unlocked.

The settings can be changed with the

following methods.

. The setting can be changed by operat-

ing the combination meter display (color

LCD) (if equipped). Refer to <Keyless Entry

System= F3-41.

. The setting can be changed by a

SUBARU dealer.

Carry the access key fob, and grip the

Rear gate opener button

following door handle.

Carry the access key fob, and press the

. The driver9s door handle:

rear gate opener button. Either only the

Either only the driver9s door will unlock, or

rear gate will unlock, or all doors will

all doors will unlock.

unlock. Also, an electronic chirp will sound

twice and the hazard warning flashers will

. The front passenger9s door handle:

flash twice.

All doors and rear gate will be unlocked.

Also, an electronic chirp will sound twice

and the hazard warning flashers will flash

twice.

3 CONTINUED 3

2-10

Keys and doors/Keyless access with push-button start system

& Unlock using PIN Code Ac-

! Preparation for registering a PIN

! Registration for a PIN code

cess

code

S02AP2102

For example, to register <32468= as the

S02AP2101

S02AP21

PIN code, perform the following proce-

When all doors including the rear gate are

1. Turn off the ignition switch.

dure.

locked, you can unlock the doors (includ-

2. Close all doors (including rear gate).

ing rear gate) without a key by pressing the

1. Press the rear lock button three times.

3. Press and hold the < = button on the

rear lock button.

2. After a chirp sounds once, press the

access key fob. Then all doors (including

rear lock button twice.

rear gate) will be locked.

3. After a chirp sounds once, press the

4. Keep the < = button pressed, and

rear lock button four times.

press the rear lock button within 5 seconds

after step 3.

4. After a chirp (ding) sounds once, press

the rear lock button six times.

5. Press and hold the rear lock button for

more than 5 seconds. Confirm a chirp

5. After a chirp (ding) sounds once, press

sound.

the rear lock button eight times.

6. Release the < = button and rear lock

6. Perform steps 1 to 5 again within

button.

approximately 30 seconds after the chirp

starts sounding intermittently.

7. Press the < = button on the access key

fob while the chirp sounds.

7. All doors will be unlocked and locked.

Then the PIN code will be registered.

Then the chirp will stop and the prepara-

tion is complete.

Rear lock button

NOTE

PIN Code Access will be helpful if the

Press the < = button within 30 seconds

key fob is accidentally left in the

of step 6 to end the preparation mode

vehicle. It is recommended that a 5-

and move on to the registration stage.

digit security code (PIN code) be regis-

Unless the < = button is pressed within

tered.

30 seconds after step 6, the PIN code

registration will be canceled.

Keys and doors -> Locking and unlocking by holding the access key fob for Your Subaru XV SUV Second Generation (2017-2022)

Related Topics

Popular Owner Manuals

Latest Owner Manuals