2-23
Keys and doors/Door locks
. The ignition switch is in the <ACC= or
belts and child restraints, locking
<ON= position (models with <keyless ac-
the doors reduces the chance of
cess with push-button start system=)
being thrown out of the vehicle in an
accident.
NOTE
It also helps prevent passengers
. When leaving the vehicle, make sure
from falling out if a door is acciden-
you are holding the key before locking
tally opened, and intruders from
the doors.
unexpectedly opening doors and
. The factory setting (default setting)
entering your vehicle.
for this function is set as <operational=.
This function9s operational/non-opera-
! How to operate the power door
tional setting can be changed by a
locking switches
SUBARU dealer. Contact a SUBARU
S02AC0203
dealer for details.
All doors and the rear gate can be locked
Example
and unlocked using the power door locking
1) Press to lock
! Non-operation of key lock-in pre-
2) Press to unlock
switches located at the driver9s side and
vention function
the front passenger9s side doors.
S02AC0602
NOTE
When the system is set so that it does not
operate, the doors are locked by the
Make sure that you do not leave the key
following operation.
inside the vehicle before locking the
. If the lock lever is turned to the front
doors from the outside using the power
(<LOCK=) position with the driver9s door
door locking switches.
open and the driver9s door is then closed
with the lock lever in that position, the
& Key lock-in prevention func-
driver9s door is locked.
tion
. If the spare key is used to lock the
S02AC06
Under the following conditions, all the
driver9s door from the outside of the
doors will not lock when the door lock
vehicle, the door is locked.
switch is pushed with the driver door open.
. The key is still in the ignition switch
(models without <keyless access with
push-button start system=)
3 CONTINUED 3