Get Keys and doors -> Keyless access with push-button start system (if equipped) Guide for Subaru XV SUV Second Generation (2017-2022)

2-2

Keys and doors/Keys

Keys

Keyless access with push-

. Glove box

button start system (if

NOTE

S02AA

NOTE

equipped)

Locking/unlocking using the remote

For models with <keyless access with

keyless entry system can also be con-

S02AP

push-button start system=, refer to

trolled with the buttons on the key. For

The following access key fobs are pro-

<Keyless access with push-button start

detailed information, refer to <Remote

vided with the vehicle.

system= F2-2.

keyless entry system= F2-17.

The following keys are provided with the

CAUTION

vehicle.

Do not attach a large key holder or

key case to either key. If it bangs

against your knees while you are

driving, it could turn the ignition

switch from the <ON= position to

the <ACC= or <LOCK= position,

thereby stopping the engine.

& Key number plate

Access key fob (main)

S02AA01

Access key fob (sub)

The key number is stamped on the key

Key number plate

number plate attached to the key set. Write

down the key number and keep it in

Master key (Main)

The keyless access with push-button start

another safe place, not in the vehicle. This

Master key (Sub)

system allows you to perform the following

number is needed to make a replacement

Sub key

functions when you are carrying the

key if you lose your key or lock it inside the

Key number plate

access key fob.

vehicle. Refer to <Key replacement= F2-

. Locking and unlocking of the doors and

A key can be used in the following

15.

rear gate. Refer to <Locking and unlocking

locations.

by holding the access key fob= F2-6.

. Ignition switch

. Starting and stopping the engine. For

. Driver9s door

detailed information, refer to <Starting and

2-3

Keys and doors/Keyless access with push-button start system

& Safety precautions

stopping engine (models with push-button

start system)= F7-11.

S02AP11

. Arming and disarming the alarm sys-

WARNING

tem. For detailed information, refer to

If you wear an implanted pacemaker

<Alarm system= F2-24.

or an implanted defibrillator, stay at

NOTE

least 8.7 in (22 cm) away from the

. Locking/unlocking using the remote

transmitting antennas installed on

keyless entry system can also be con-

the vehicle.

trolled with the buttons on the access

The radio waves from the transmit-

key fob. For detailed information, refer

ting antennas on the vehicle could

to <Remote keyless entry system= F2-

adversely affect the operation of

17.

implanted pacemakers and im-

. Carefully store the key number plate

Release button

planted defibrillators.

supplied with the access key fob. It is

Emergency key

If you wear electronic medical equip-

necessary for vehicle repair and addi-

While pressing the release button of the

ment other than an implanted pace-

tional registration of access key fobs.

access key fob, take out the emergency

maker or an implanted defibrillator,

For details, refer to <Key replacement=

key.

before using the keyless access

F2-15.

The emergency key is used for the follow-

with push-button start system, refer

An emergency key is attached to each

ing operations.

to <Radio waves used for the key-

access key fob.

less access with push-button start

. Locking and unlocking the driver9s door

system= mentioned later, and con-

. Locking and unlocking the glove box

tact the electronic medical equip-

NOTE

ment manufacturer for more infor-

mation. The radio waves from the

The glove box can be kept locked when

transmitting antennas on the vehicle

you leave your vehicle and the access

could adversely affect the operation

key fob (with the emergency key re-

of the electronic medical equipment.

moved) at a parking facility.

<Radio waves used for the keyless

access with push-button start sys-

tem=

3 CONTINUED 3

2-4

Keys and doors/Keyless access with push-button start system

. The keyless access with push-

CAUTION

button start system uses radio

waves of the following fre-

. Never leave or store the access

quency* in addition to the radio

key fob inside the vehicle or

waves used for the remote key-

within 6.6 ft (2 m) around the

less entry system. The radio

vehicle (e.g., in the garage). The

waves are periodically output

access key fob may be locked

from the antennas installed on

inside the vehicle, or the battery

the vehicle as shown in the

may discharge rapidly. Note that

following illustrations.

the push-button ignition switch

may not turn on in some cases

* Radio frequency: 134 kHz

depending on the location of the

access key fob.

. The access key fob contains

electronic components. Observe

the following precautions to pre-

vent malfunctions.

3 It is recommended to have the

access key battery replaced at

an authorized SUBARU dealer

to avoid the risk of damage.

3 Do not get the access key fob

wet. If the access key fob gets

wet, wipe it off immediately

and let it dry completely.

Antenna

3 Do not apply strong impacts to

the access key fob.

3 Never leave the access key

fob in direct sunlight or any-

where that may become hot,

such as on the dashboard. It

2-5

Keys and doors/Keyless access with push-button start system

and power transmission lines

may damage the battery or

the operation of the airplane.

cause circuit malfunctions.

When carrying the access key

3 When products that transmit

fob in a bag, take measures to

radio waves are used, such as an

3 Do not wash the access key

prevent the buttons from being

access key fob or a remote trans-

fob in an ultrasonic washer.

pressed accidentally.

mitter key of another vehicle

3 Do not leave the access key

3 When carrying the access key fob

fob in humid or dusty loca-

of your vehicle together with the

NOTE

tions. Doing so may cause

access key fob or the remote trans-

malfunctions.

. The operational/non-operational

mitter of another vehicle

3 Keep the access key fob away

setting for the keyless access function

3 When the access key fob is

from magnetic sources.

can be changed. For the setting proce-

placed near wireless communica-

dure, refer to <Disabling keyless ac-

3 Do not leave the access key

tion equipment such as a cell phone

cess function= F2-12.

fob near a personal computer

3 When the access key fob is

. For detailed information about the

or home electrical appliance.

placed near a metallic object

operation method for the push-button

3 When metallic accessories are

3 Do not leave the access key

ignition switch while the keyless ac-

attached to the access key fob

fob near a battery charger or

cess function is switched to the non-

any electrical accessories.

3 When carrying the access key fob

operational mode, refer to <Access key

with electronic appliances such as a

3 Do not apply metallic window

fob 3 if access key fob does not operate

laptop computer

tint or attach metallic objects

properly= F9-17.

3 When the battery of the access

to the windows.

. The keyless access with push-but-

key fob is discharged

ton start system uses weak radio

3 Do not fit non genuine acces-

. The access key fob is always com-

waves. The status of the access key

sories or parts.

municating with the vehicle and is

fob and environmental conditions may

. If the access key fob is dropped,

continuously using the battery.

interfere with the communication be-

the integrated emergency key in-

Although the life of the battery varies

tween the access key fob and the

side may become loose. Be care-

depending on the operating conditions,

vehicle under the following conditions,

ful not to lose the emergency key.

it is approximately 1 to 2 years. If the

and it may not be possible to lock or

. When traveling in an airplane, do

battery becomes fully discharged, re-

unlock the doors or start the engine.

not press the button of the ac-

place it with a new one.

3 When operating near a facility

cess key fob. If any button of the

. If an access key fob is lost, it is

where strong radio waves are trans-

access key fob is pressed, radio

recommended that all of the remaining

mitted, such as a broadcast station

waves are emitted and may affect

access key fobs be reregistered. For

3 CONTINUED 3

$2-6Keys and doors/Keyless access with push-button start systemreregistration of an access key fob,3 On the instrument panel! Operating rangescontact a SUBARU dealer.3 On the floorS02AP2001. For a spare access key fob, contact a3 Inside the glove boxSUBARU dealer.3 Inside the door trim pocket. Up to 7 access key fobs can be3 On the rear seatregistered for one vehicle.3 In the cargo area. Do not leave the access key fob inthe storage spaces inside the vehicle,If you do, the following situationssuch as the door pocket, dashboard,may the corner of the cargo area.3 The access key fob is mistakenlyVibrations may damage the key fob orlocked inside the on the switch, possibly resulting in3 A false warning issues althougha malfunction actually occurs.. After the vehicle battery is dis-3 No warning issues even whencharged or replaced, initialization ofany malfunction occurs.1)Antennathe steering lock system may be re-2)Operating range (approximately 16 to 32quired to start the engine. In this case,in (40 to 80 cm))& Locking and unlocking byperform the following procedure toholding the access key fobinitialize the steering lock.S02AP20(1) Turn the push-button ignitionWhen the access key fob is carried withinswitch to the <OFF= position. Forthe operating range, the doors and the reardetails, refer to <Switching powergate can be locked/unlocked just bystatus= the door handle.(2) Open and close the driver9sNOTEdoor.(3) Wait for approximately 10 sec-The vehicle can also be locked/ with the remote keyless entrysystem. For details, refer to <RemoteWhen the steering is locked, the initi-keyless entry system= is completed.. Do not leave the access key fob in1)LED indicatorthe following places.$

2-6

Keys and doors/Keyless access with push-button start system

reregistration of an access key fob,

3 On the instrument panel

! Operating ranges

contact a SUBARU dealer.

3 On the floor

S02AP2001

. For a spare access key fob, contact a

3 Inside the glove box

SUBARU dealer.

3 Inside the door trim pocket

. Up to 7 access key fobs can be

3 On the rear seat

registered for one vehicle.

3 In the cargo area

. Do not leave the access key fob in

the storage spaces inside the vehicle,

If you do, the following situations

such as the door pocket, dashboard,

may occur.

inside the corner of the cargo area.

3 The access key fob is mistakenly

Vibrations may damage the key fob or

locked inside the vehicle.

turn on the switch, possibly resulting in

3 A false warning issues although

a lockout.

no malfunction actually occurs.

. After the vehicle battery is dis-

3 No warning issues even when

charged or replaced, initialization of

any malfunction occurs.

Antenna

the steering lock system may be re-

Operating range (approximately 16 to 32

quired to start the engine. In this case,

in (40 to 80 cm))

& Locking and unlocking by

perform the following procedure to

holding the access key fob

initialize the steering lock.

S02AP20

(1) Turn the push-button ignition

When the access key fob is carried within

switch to the <OFF= position. For

the operating range, the doors and the rear

details, refer to <Switching power

gate can be locked/unlocked just by

status= F3-7.

touching the door handle.

(2) Open and close the driver9s

NOTE

door.

(3) Wait for approximately 10 sec-

The vehicle can also be locked/un-

onds.

locked with the remote keyless entry

system. For details, refer to <Remote

When the steering is locked, the initi-

keyless entry system= F2-17.

alization is completed.

. Do not leave the access key fob in

LED indicator

the following places.

2-7

Keys and doors/Keyless access with push-button start system

When the access key fob is within either of

function when the access key fob is

. Unlock and lock rear gate

the operating ranges of the front doors, the

inside the vehicle. However, depending

NOTE

LED indicator on the access key fob

on the status of the access key fob and

. It is not possible to lock the doors

flashes. When the keyless access func-

the environmental conditions, the ac-

and rear gate using the keyless access

tions are disabled, the LED indicator does

cess key fob may be locked inside the

function when the push-button ignition

not flash unless a button on the access key

vehicle. Before locking the vehicle,

switch is in the <ACC= or <ON= position.

fob is pressed.

make sure that you have the access

Refer to <Switching power status= F3-

key fob.

NOTE

. When the battery of the access key

. If the access key fob is placed too

. If the door handle is gripped with a

fob is discharged, or when operating it

close to the vehicle body, the keyless

gloved hand, the door lock may not be

in a location with strong radio waves or

access functions may not operate

released.

noise (e.g., near a radio tower, power

properly. If they do not operate prop-

. If the door lock sensor is touched

plant, broadcast station or an area

erly, repeat the operation from further

three times or more repeatedly, the

where wireless equipment is used), or

away.

system will ignore the sensor opera-

while talking on a cell phone, the

. If the access key fob is placed near

tion.

operating ranges may be reduced, or

the ground or in an elevated location

. When performing the locking proce-

the keyless access function may not

from the ground, even if it is in the

dure too quickly, locking may not have

operate.

indicated operating range, the keyless

been completed. After performing the

In such a case, perform the procedure

access function may not operate prop-

locking procedure, it is recommended

described in <Locking and unlocking=

erly.

to pull the REAR door handle to confirm

F9-17.

. When the access key fob is within

that the doors have been locked.

. The doors may lock or unlock when

the operating range, it is possible for

. If any of the doors (or the rear gate)

the car is being washed or exposed to a

anyone, even someone who is not

are not fully closed, the following will

significant amount of water that con-

carrying the access key fob, to operate

occur to alert you that the doors (or the

tacts the door handle while the key fob

the keyless access function. Note that

rear gate) are not properly closed.

is still in the operating range.

the keyless access function can be

3 an electronic chirp sounds five

! How to lock and unlock

operated only by the door handle, door

times.

S02AP2002

lock sensor, rear gate opener button or

It is possible to perform the following

3 the hazard warning flashers flash

rear lock button in the operating range

operations when you are carrying the

five times.

in which the access key fob is detected.

access key fob.

. It is possible to lock the doors even

. It is not possible to lock the doors

. Lock and unlock the doors

when one of the doors is open. After

and rear gate using the keyless access

3 CONTINUED 3

2-8

Keys and doors/Keyless access with push-button start system

performing the locking procedure,

! Locking with the door lock sensor

! Locking with the rear lock button

close the opened door or rear gate to

S02AP200201

S02AP200202

lock it.

. Within 3 seconds after locking the

doors and the rear gate by using the

keyless access function, it is not pos-

sible to unlock doors and/or the rear

gate by using the keyless access func-

tion.

. When locking, be sure to carry the

access key fob to prevent locking the

access key fob in the vehicle.

. The setting of the hazard warning

flasher operation and the volume of the

audible signal can be changed by your

Door lock sensor

Rear lock button

SUBARU dealer. Contact your SUBARU

Carry the access key fob, close all doors

dealer for details. Also, for models with

including the rear gate, and touch the door

including the rear gate and press the rear

the combination meter display (color

lock sensor on the door handle. All doors

lock button. The rear gate and all doors will

LCD), the setting of the hazard warning

including the rear gate will be locked. Also,

be locked. Also, an electronic chirp will

flasher operation can be changed by

an electronic chirp will sound once and the

sound once and the hazard warning

operating the combination meter dis-

hazard warning flashers will flash once.

flashers will flash once.

play (color LCD). For details, refer to

<Keyless Entry System= F3-41.

2-9

Keys and doors/Keyless access with push-button start system

! Unlocking

! Unlocking rear gate

! Door unlock selection function

S02AP2003

S02AP200203

S02AP200204

When the door is unlocked using the

keyless access function, only the doors

that were set can be unlocked.

The settings can be changed with the

following methods.

. The setting can be changed by operat-

ing the combination meter display (color

LCD) (if equipped). Refer to <Keyless Entry

System= F3-41.

. The setting can be changed by a

SUBARU dealer.

Carry the access key fob, and grip the

Rear gate opener button

following door handle.

Carry the access key fob, and press the

. The driver9s door handle:

rear gate opener button. Either only the

Either only the driver9s door will unlock, or

rear gate will unlock, or all doors will

all doors will unlock.

unlock. Also, an electronic chirp will sound

twice and the hazard warning flashers will

. The front passenger9s door handle:

flash twice.

All doors and rear gate will be unlocked.

Also, an electronic chirp will sound twice

and the hazard warning flashers will flash

twice.

3 CONTINUED 3

2-10

Keys and doors/Keyless access with push-button start system

& Unlock using PIN Code Ac-

! Preparation for registering a PIN

! Registration for a PIN code

cess

code

S02AP2102

For example, to register <32468= as the

S02AP2101

S02AP21

PIN code, perform the following proce-

When all doors including the rear gate are

1. Turn off the ignition switch.

dure.

locked, you can unlock the doors (includ-

2. Close all doors (including rear gate).

ing rear gate) without a key by pressing the

1. Press the rear lock button three times.

3. Press and hold the < = button on the

rear lock button.

2. After a chirp sounds once, press the

access key fob. Then all doors (including

rear lock button twice.

rear gate) will be locked.

3. After a chirp sounds once, press the

4. Keep the < = button pressed, and

rear lock button four times.

press the rear lock button within 5 seconds

after step 3.

4. After a chirp (ding) sounds once, press

the rear lock button six times.

5. Press and hold the rear lock button for

more than 5 seconds. Confirm a chirp

5. After a chirp (ding) sounds once, press

sound.

the rear lock button eight times.

6. Release the < = button and rear lock

6. Perform steps 1 to 5 again within

button.

approximately 30 seconds after the chirp

starts sounding intermittently.

7. Press the < = button on the access key

fob while the chirp sounds.

7. All doors will be unlocked and locked.

Then the PIN code will be registered.

Then the chirp will stop and the prepara-

tion is complete.

Rear lock button

NOTE

PIN Code Access will be helpful if the

Press the < = button within 30 seconds

key fob is accidentally left in the

of step 6 to end the preparation mode

vehicle. It is recommended that a 5-

and move on to the registration stage.

digit security code (PIN code) be regis-

Unless the < = button is pressed within

tered.

30 seconds after step 6, the PIN code

registration will be canceled.

2-11

Keys and doors/Keyless access with push-button start system

NOTE

& Power saving function

. The PIN code cannot be deleted

while the keyless access function is

. Press the rear lock button ten times

S02AP23

The keyless access function will be dis-

disabled by operating the access key

to enter <0=.

abled in the following cases to protect the

fob.

. Change the PIN code frequently to

access key fob battery and the vehicle

. Reregister the PIN code in the fol-

protect your vehicle from theft.

battery.

lowing case.

. If you have lent your vehicle to

. Case 1: When the keyless access

another person, confirm that the PIN

3 when you forget the PIN code

function and the remote keyless entry

code has not been changed or deleted.

3 when you want to change the PIN

system have not been used for 2 weeks

If the PIN code has been changed or

code

or longer while all doors are locked

deleted, reregister a new PIN code.

! Unlocking

. If you make an error during the

Operate one of the following items to

S02AP2103

registration procedure, press the < =

Perform steps 1 to 5 described in <Regis-

recover the keyless access function:

or < = button on the access key fob.

tration for a PIN code=.

3 Unlock the doors by operating any

Then, start over from the procedure

procedure other than gripping the front

NOTE

described in <Preparation for register-

passenger9s door handle

ing a PIN code=.

. You cannot unlock by PIN Code

3 Lock the doors

. To protect your vehicle from theft,

Access in the following cases.

3 Open a door and then close it

you cannot register a string of the same

3 when the access key fob is within

five numbers together, such as

the operating ranges

. Case 2: When the access key fob has

<00000=, nor <12345= as a PIN code.

been left in the operating range for 10

3 when the ignition switch is in the

. Do not register your vehicle license

minutes or longer while all doors are

<ACC= or <ON= position

plate number or simple numbers such

locked

. If you make an operation error dur-

as <11122= or <12121= as a PIN code.

ing the unlocking procedure, start over

Operate one of the following items to

Doing so will increase the risk of

with the unlocking procedure after

recover the keyless access function:

vehicle theft.

waiting for 5 seconds or longer.

3 Unlock the doors by gripping the

. When you try to register <22222=, the

. To protect your vehicle from theft, a

door handle

registered PIN code will be deleted. You

buzzer will sound if incorrect PIN codes

3 Unlock the doors by pressing the

cannot unlock the doors by PIN Code

are entered five times continuously. If

rear gate opener button

Access until a new code is registered.

this occurs, you cannot unlock the

3 Lock the doors by touching the door

. After registering a new PIN code,

doors by PIN Code Access for 5

lock sensor

make sure that you can unlock the

minutes.

3 Lock or unlock the doors by using

doors using the PIN code.

3 CONTINUED 3

2-12

Keys and doors/Keyless access with push-button start system

the remote keyless entry system

and push-button start system will not be

. To start the engine while the func-

available.

tions are disabled, perform the proce-

3 Lock or unlock the doors by using

dure described in <Starting engine=

the power door locking switch

To cancel the power save mode, press one

3 Open either of the front doors

of the buttons on the access key fob.

F9-18.

! Disabling functions

& Power saving function of ac-

& Disabling keyless access

S02AP0701

cess key fob

function

! By operating the access key fob

S02AP22

S02AP07

S02AP070102

This function stops the access key fob

If you have registered a PIN code for PIN

WARNING

from receiving signals and helps minimize

Code Access, you can disable the keyless

the battery consumption of the access key

access function by operating the access

If you wear an implanted pacemaker

fob.

key fob. For details about registering a PIN

or an implanted defibrillator, per-

code, refer to <Preparation for registering a

1. Press the < = button twice while hold-

form the procedure described in

PIN code= F2-10.

ing the < = button.

<By operating the driver9s door=

1. Open the driver9s door.

F2-13 to disable the keyless access

2. Rotate the lock lever toward the lock

function. If you perform the proce-

position.

dure described in <By operating the

access key fob= F2-12, the opera-

tion of an implanted pacemaker or

implanted defibrillator may be af-

fected by the radio waves from the

transmitter antenna.

When the vehicle is not going to be used

for a long time, or when you choose not to

use the keyless access function, the key-

less access function can be disabled.

LED indicator

NOTE

2. Confirm that the LED indicator blinks 4

. The locking and unlocking function

times to notify that the setting is complete.

by the remote keyless entry system is

3. Press and hold the < = button and < =

When the access key fob is in the power

not disabled.

button on the access key fob simulta-

save mode, the keyless access function

2-13

Keys and doors/Keyless access with push-button start system

neously for more than 5 seconds.

performed, push < = of the power door

tion was disabled.

locking switch twice while the door is open.

3 When disabling by operating the

A chirp sound will be heard, and the

driver9s door: a chirp will not be

7. Within 10 seconds after step 6 is

function will be disabled.

heard

performed, close and open the driver9s

door once.

! By operating the driver9s door

3 When disabling by operating the

access key fob: a chirp will be heard

S02AP070101

8. Within 5 seconds after step 7 is

1. Sit in the driver9s seat, and close the

performed, close the door.

door.

& Selecting audible signal op-

A chirp sound will be heard, and the

eration

functions will be disabled.

S02AP12

Using an electronic chirp, the system will

NOTE

give you an audible signal when the doors

lock and unlock. If desired, you may turn

In steps 4 and 6, press the power door

the audible signal off. For more details,

locking switch slowly. If the switch is

contact a SUBARU dealer.

pressed quickly, the functions may not

be disabled.

NOTE

For models with the combination meter

! Enabling functions

display (color LCD), the setting can be

S02AP0702

When the procedure to disable the func-

changed by operating the combination

tions is performed again, a chirp sound will

meter display (color LCD). For details,

be heard, and the functions are enabled.

refer to <Vehicle Setting= F3-41.

2. Push < = of the power door locking

NOTE

switch.

& Warning chimes and warning

. The keyless access function will be

3. Within 5 seconds after step 2 is

enabled only if you perform the proce-

indicator

performed, open the driver9s door.

dure in the same manner you disabled

S02AP06

The keyless access with push-button start

4. Within 5 seconds after step 3 is

the function (for example, when dis-

system sounds a warning chime and

performed, push < = of the power door

abling by operating the driver9s door,

flashes the access key warning indicator

locking switch twice while the door is open.

the function will not be enabled even if

on the combination meter in order to

5. Within 10 seconds after step 4 is

you operate the access key fob).

minimize improper operations and help

performed, close and open the driver9s

. Press the push-button ignition

protect your vehicle from theft.

door twice.

switch if you do not know the proce-

For details, refer to <Warning chimes and

6. Within 10 seconds after step 5 is

dure in which the keyless access func-

3 CONTINUED 3

2-14

Keys and doors/Keyless access with push-button start system

& Certification for keyless ac-

warning indicator of the keyless access

. Canada-spec. models

with push-button start system= F3-25.

cess with push-button start

system

& When access key fob does

S02AP14

. U.S.-spec. models

not operate properly

S02AP08

FCC ID: HYQ14AHK

Refer to <Access key fob 3 if access key

fob does not operate properly= F9-17.

FCC ID: Y8PFJ16-1

FCC ID: Y8PSSPIMB02

& Replacing battery of access

key fob

CAUTION

S02AP09

Refer to <Replacing battery of access key

FCC WARNING

fob= F11-43.

Changes or modifications not ex-

pressly approved by the party re-

& Replacing access key fob

sponsible for compliance could void

S02AP13

Access key fobs can be replaced at

the user9s authority to operate the

SUBARU dealers. For more details, con-

equipment.

tact a SUBARU dealer.

NOTE

This device complies with part 15 of the

FCC Rules. Operation is subject to the

following two conditions: (1) This de-

vice may not cause harmful interfer-

ence, and (2) this device must accept

any interference received, including

interference that may cause undesired

operation.

2-15

Keys and doors/Immobilizer

NOTE

. Mexico-spec. models

Immobilizer

. To protect your vehicle from theft,

S02AB

please pay close attention to the follow-

The immobilizer system is designed to

ing security precautions:

prevent an unauthorized person from

3 Never leave your vehicle unat-

starting the engine. Only keys registered

tended with its keys inside.

with your vehicle9s immobilizer system can

3 Before leaving your vehicle,

be used to operate your vehicle. If engine

close all windows and the moon-

start is attempted with an unregistered

roof, and lock the doors and rear

access key fob or key, the engine will not

gate.

start. Even if the engine does start, it will

3 Do not leave spare keys or any

stop after a few seconds. This system,

record of your key number in the

however, is not a 100% anti-theft guaran-

vehicle.

tee.

. The vehicle has a maintenance-free

IFT

CAUTION

type immobilizer system.

RLVDE1415-1661

. Do not place the key under direct

14AHK

& Security indicator light

sunlight or anywhere it may be-

DENSO

S02AB02

Refer to <Security indicator light= F3-29.

come hot.

. Do not get the key wet. If the key

& Key replacement

gets wet, wipe it dry with a cloth

S02AB03

immediately.

Your key number plate will be required if

you ever need a replacement key made.

. Do not modify or remove the

Any new key must be registered for use

system. If modified or removed,

with your vehicle9s immobilizer system

the proper operation of the sys-

before it can be used. The maximum

tem cannot be guaranteed.

number of keys that can be registered for

use with one vehicle is as follows.

. Four (models without <keyless access

with push-button start system=)

. Seven (models with <keyless access

with push-button start system=)

3 CONTINUED 3

Keys and doors -> Keyless access with push-button start system (if equipped) for Your Subaru XV SUV Second Generation (2017-2022)

Related Topics

Popular Owner Manuals

Latest Owner Manuals