1-28
Seat, seatbelt and SRS airbags/Child restraint systems
child with proper protection. The child
! Installing a rearward facing child
WARNING
restraint system should meet all applicable
restraint
requirements of Federal Motor Vehicle
S01AG0401
SINCE YOUR VEHICLE IS
Safety Standards for the United States or
WARNING
EQUIPPED WITH A PASSENGER9S
of Canada Motor Vehicle Safety Standards
SRS AIRBAG, NEVER INSTALL A
for Canada. It can be identified by looking
NEVER INSTALL A FORWARD OR
FORWARD OR REARWARD FACING
for the label on the child restraint system or
REARWARD FACING CHILD SEAT IN
CHILD SAFETY SEAT IN THE FRONT
the manufacturer9s statement of compli-
THE FRONT PASSENGER9S SEAT.
PASSENGER9S SEAT. DOING SO
ance in the document attached to the
DOING SO RISKS SERIOUS INJURY
RISKS SERIOUS INJURY OR DEATH
system.
OR DEATH TO THE CHILD BY PLA-
TO THE CHILD BY PLACING THE
CING THE CHILD9S HEAD TOO
Also it is important for you to make sure
CHILD9S HEAD TOO CLOSE TO THE
CLOSE TO THE SRS AIRBAG.
that the child restraint system is compa-
SRS AIRBAG.
tible with the vehicle in which it will be
used.
& Choosing a child restraint
& Installing child restraint sys-
system
tems with ALR/ELR seatbelt
S01AG02
S01AG04
CAUTION
When installing a child restraint
system in the rear center seating
position, set both seatbacks to the
original position. Otherwise, the
child restraint system cannot be
securely restrained, which may re-
sult in death or serious injuries in
1. Shake the seatback slightly to confirm
the event of sudden stop, sudden
that it is securely locked into place.
steering maneuver or an accident.
3 Check the red colored unlocking
marker which is attached to the bottom
Choose a child restraint system that is
of the lock release knob is invisible. For
appropriate for the child9s age and size
details, refer to <Folding down the rear
(weight and height) in order to provide the
English 
