2017-2022 Subaru XV SUV Seat, seatbelt and SRS airbags -> Head restraints User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Seat, seatbelt and SRS airbags -> Head restraints for Your Subaru XV SUV Second Generation (2017-2022)

1-8Seat, seatbelt and SRS airbags/SeatsTo install:fold down in the event of sudden! Front seatsbraking, or objects may move outS01AQ0401Install the head restraint into the holes thatBoth the driver9s seat and the frontfrom the cargo area, which couldare located on the top of the seatback untilpassenger9s seat are equipped with headcause serious injury or head restraint locks. Press and holdrestraints. Both head restraints are adjus-the release button to lower the headtable in the following .& Head restraints! Height adjustmentS01AQ040101S01AQ04WARNINGThe front seat head restraints aredesigned to be installed into thefront seats only. The rear seat headrestraints are designed to be in-stalled into the rear seats only. Donot attempt to install the front seathead restraints into the rear seats, orthe rear seat head restraints into thefront head restraint should be adjusted so1)Head restraintthat the center of the head restraint isNOTE2)Release buttonclosest to the top of the occupant9s is possible to adjust the angle of theTo raise:NOTEfront seat head restraints only. WhenPull the head restraint the front seat head restraints,When the head restraint cannot beTo lower:make sure that the angle of the headpulled out or installed due to insuffi-restraints can be the head restraint down while press-cient clearance between the head re-ing the release button on the top of thestraint and the roof, tilt the seat perform the installation and re-To remove:moval pressing the release button, pull outthe head restraint.
1-8
Seat, seatbelt and SRS airbags/Seats
To install:
fold down in the event of sudden
! Front seats
braking, or objects may move out
S01AQ0401
Install the head restraint into the holes that
Both the driver9s seat and the front
from the cargo area, which could
are located on the top of the seatback until
passenger9s seat are equipped with head
cause serious injury or death.
the head restraint locks. Press and hold
restraints. Both head restraints are adjus-
the release button to lower the head
table in the following ways.
restraint.
& Head restraints
! Height adjustment
S01AQ040101
S01AQ04
WARNING
The front seat head restraints are
designed to be installed into the
front seats only. The rear seat head
restraints are designed to be in-
stalled into the rear seats only. Do
not attempt to install the front seat
head restraints into the rear seats, or
the rear seat head restraints into the
front seats.
Each head restraint should be adjusted so
1)
Head restraint
that the center of the head restraint is
NOTE
2)
Release button
closest to the top of the occupant9s ears.
It is possible to adjust the angle of the
To raise:
NOTE
front seat head restraints only. When
Pull the head restraint up.
installing the front seat head restraints,
When the head restraint cannot be
To lower:
make sure that the angle of the head
pulled out or installed due to insuffi-
restraints can be adjusted.
Push the head restraint down while press-
cient clearance between the head re-
ing the release button on the top of the
straint and the roof, tilt the seat and
seatback.
then perform the installation and re-
To remove:
moval tasks.
While pressing the release button, pull out
the head restraint.
1-9Seat, seatbelt and SRS airbags/SeatsAfter installing the head restraint, make! Rear seats! Angle adjustmentsure it is securely locked.S01AQ0402S01AQ040102Both the rear window side seats and therear center seat are equipped with head! Rear center seating positionrestraints.S01AQ040202CAUTION! Rear windows side seating posi-tionThe head restraint is not intended toS01AQ040201be used at the retracted sitting on the seat, raise thehead restraint to the extended angle of the head restraint can beadjusted in several steps. While maintain-ing a suitable driving posture, adjust thehead restraint to a position where the backof your head is as close to the headrestraint as possible.1)Head restraintTo tilt:2)Release buttonTilt the head restraint by hand to theTo remove:preferred position. A click will be audibleWhile pressing the release button, pull outwhen the head restraint is head return:1)Incorrect (retracted position)To install:Tilt the head restraint once as far forward2)Correct (extended position)Install the head restraint into the holes thatas it can go. The head restraint willare located on the top of the seatback untilautomatically return to the fully uprightthe head restraint locks. Press and holdposition. Then, adjust the head restraintthe release button to lower the headagain to the preferred .3 CONTINUED 3
1-9
Seat, seatbelt and SRS airbags/Seats
After installing the head restraint, make
! Rear seats
! Angle adjustment
sure it is securely locked.
S01AQ0402
S01AQ040102
Both the rear window side seats and the
rear center seat are equipped with head
! Rear center seating position
restraints.
S01AQ040202
CAUTION
! Rear windows side seating posi-
tion
The head restraint is not intended to
S01AQ040201
be used at the retracted position.
Before sitting on the seat, raise the
head restraint to the extended posi-
tion.
The angle of the head restraint can be
adjusted in several steps. While maintain-
ing a suitable driving posture, adjust the
head restraint to a position where the back
of your head is as close to the head
restraint as possible.
1)
Head restraint
To tilt:
2)
Release button
Tilt the head restraint by hand to the
To remove:
preferred position. A click will be audible
While pressing the release button, pull out
when the head restraint is locked.
the head restraint.
To return:
1)
Incorrect (retracted position)
To install:
Tilt the head restraint once as far forward
2)
Correct (extended position)
Install the head restraint into the holes that
as it can go. The head restraint will
are located on the top of the seatback until
automatically return to the fully upright
the head restraint locks. Press and hold
position. Then, adjust the head restraint
the release button to lower the head
again to the preferred angle.
restraint.
3 CONTINUED 3
1-10Seat, seatbelt and SRS airbags/Seat heaterSeat heater (if equipped)When the rear-center seating position isoccupied, raise the head restraint to theS01ABextended position. When the rear centerThe seat heater is equipped in the frontseating position is not occupied, lower restraint to improve rearward seat heater operates when the ignitionswitch is either in the <ACC= or <ON=position.& Safety precautionsS01AB03CAUTION1)Head restraint. People with delicate skin may2)Release buttonsuffer slight burns even at lowtemperatures if they use the seatTo raise:heater for a long period of the head restraint using the heater, always beTo lower:sure to warn the persons con-Push the head restraint down while the release button on the top of the. Do not put anything on the insulates against heat,To remove:such as a blanket, cushion, orWhile pressing the release button, pull outsimilar items. This may cause thethe head heater to install:. When the seat is warmed enoughInstall the head restraint into the holes thator before you leave the vehicle,are located on the top of the seatback untilbe sure to turn off the seat head restraint locks. Press and holdthe release button to lower the headrestraint.
1-10
Seat, seatbelt and SRS airbags/Seat heater
Seat heater (if equipped)
When the rear-center seating position is
occupied, raise the head restraint to the
S01AB
extended position. When the rear center
The seat heater is equipped in the front
seating position is not occupied, lower the
seats.
head restraint to improve rearward visibi-
lity.
The seat heater operates when the ignition
switch is either in the <ACC= or <ON=
position.
& Safety precautions
S01AB03
CAUTION
1)
Head restraint
. People with delicate skin may
2)
Release button
suffer slight burns even at low
temperatures if they use the seat
To raise:
heater for a long period of time.
Pull the head restraint up.
When using the heater, always be
To lower:
sure to warn the persons con-
Push the head restraint down while press-
cerned.
ing the release button on the top of the
. Do not put anything on the seat
seatback.
which insulates against heat,
To remove:
such as a blanket, cushion, or
While pressing the release button, pull out
similar items. This may cause the
the head restraint.
seat heater to overheat.
To install:
. When the seat is warmed enough
Install the head restraint into the holes that
or before you leave the vehicle,
are located on the top of the seatback until
be sure to turn off the seat heater.
the head restraint locks. Press and hold
the release button to lower the head
restraint.

Related Topics

Seat, seatbelt and SRS airbags
Seats Safety tips for seat Front seats Rear seats Seat heater (if equipped) Seatbelts Seatbelt safety tips Fastening the seatbelt Seatbelt maintenance Seatbelt pretensioners Child restraint systems Where to place a child restraint system Choosing a child restraint system Installing child restraint systems with ALR/ELR seatbelt Installing a booster seat Installation of child restraint systems by use of lower and tether anchorages (LATCH) Top tether anchorages *SRS airbag (Supplemental Restraint System airbag) SUBARU advanced frontal airbag system SRS side airbag and SRS curtain airbag

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot