2018-2026 Suzuki Jimny SUV OPERATING YOUR VEHICLE -> Ignition switch User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

OPERATING YOUR VEHICLE -> Ignition switch for Your Suzuki Jimny SUV Fourth Generation (2018-2026)

Engine oil consumption
It is normal for the engine to consume
some engine oil during normal vehicle
operation.
The amount of engine oil consumption
depends on viscosity and quality of the oil
and your driving conditions.
More oil is consumed during high-speed
driving and when there is frequent acceler-
ation and deceleration. Under high loads,
your engine also will consume more oil.
A new engine also consumes more oil,
since its pistons, piston rings and cylinder
walls have not yet become conditioned.
New engines reach the normal level of oil
consumption only after approximately
5000 km (3000 miles) driving.
Oil consumption:
Max. 1.0 L per 1000 km
(1 Qt. per 600 miles)
When judging the amount of oil consump-
tion, note that the oil may become diluted
and it is difficult to judge the accurate oil
level.
As an example, if a vehicle is used for
repeated short trips, and consumes a nor-
mal amount of oil, the dipstick may not
show any drop in the oil level at all, even
after 1000 km (600 miles) or more of driv-
ing. This is because the oil gradually
becomes diluted with fuel or moisture,
making it appear that the oil level has not
changed.
You should also be aware that the diluting
ingredients evaporate out when the vehicle
is subsequently driven at high speeds,
such as on an expressway, making it
appear that oil is excessively consumed
after high-speed driving.
OPERATING YOUR VEHICLE
Ignition switch
650611
A WARNING
To avoid possible injury, do not oper-
ate controls by reaching through the
steering wheel.
3-2
OPERATING YOUR VEHICLE
68PH00310
The ignition switch has the following four
positions:
LOCK
This is the normal parking position. It is the
only position in which the key can be
removed.
3-3
Manual transmission
Turn to "LOCK"
60G033
Manual transmission vehicles
You must push in the key to turn it to
"LOCK" position. It locks the ignition, and
prevents normal use of the steering
wheel after the key is removed.
Automatic transmission vehicles
The gearshift lever must be in "P" (Park)
position to turn the key to "LOCK" posi-
tion. It locks the ignition and prevents
normal use of the steering wheel and
gearshift lever.
To release the steering lock, insert the key
and turn it clockwise to one of the other
positions. If you have trouble turning the
key to unlock the steering wheel, try turn-
ing the steering wheel slightly to the right
or left while turning the key.
ACC
Accessories such as the radio can oper-
ate, but the engine is off.
ON
This is the normal operating position. All
electrical systems are on.
START
This is the position for starting the engine
using the starter motor. The key should be
released from this position as soon as the
engine starts.
Ignition key reminder
A buzzer sounds intermittently to remind
you to remove the ignition key if it is in the
ignition switch when the driver's door is
opened.
A. WARNING
Never return the ignition switch to
"LOCK" position and remove the
ignition key while the vehicle is
moving. The steering wheel will
lock and you will not be able to
steer the vehicle.
(Continued)
A. WARNING
(Continued)
Always return the ignition switch to
"LOCK" position and remove the
ignition key when leaving the vehi-
cle even only for a short time. Also
do not leave children alone in a
parked vehicle. Unattended chil-
dren may be able to start the vehi-
cle or shift the transmission into
neutral, which could result in an
accident. There is also a danger
that children may injure them-
selves by playing with the power
windows or other moving features
of the vehicle. In addition, heat
build-up or extremely cold tem-
peratures inside the vehicle can be
fatal to children.
OPERATING YOUR VEHICLE
NOTICE
For protection of a lead-acid bat-
tery and a starter motor, do not use
the starter motor by turning the key
to "START" for more than 12 sec-
onds at a time. If the engine dose
not start, turn the key to "LOCK"
position and wait for more than 30
seconds before trying again. If the
engine does not start after several
attempts, consult a SUZUKI dealer
or a qualified workshop.
Do not leave the ignition switch in
"ON" position if the engine is not
running as the lead-acid battery
will discharge.
3-4

Related Topics

Popular Owner Manuals