WhenDriving -> 3-13. Rear View Monitor for Your Toyota Yaris 4 Door Fourth Generation (2021-2026)

245  
3-13. Rear View Monitor  
Rear View Monitor  
The rear view monitor provides visual images of the rear of the  
vehicle when reversing.  
If water, snow, or mud is stuck on the camera lens, wipe it off using a soft  
cloth. If it cannot be wiped off, use a mild detergent.  
If the camera temperature changes rapidly (Hot to cold, cold to hot), the rear  
view monitor may not operate correctly.  
When replacing the tires, consult your Toyota dealer. Replacing the tires  
could result in deviation of the guide lines which appear on the display.  
3
If the vehicle’s front, side, or rear has been involved in a collision, the align-  
ment of the rear view parking camera (location, installation angle) may have  
deviated. Always consult your Toyota dealer to have the vehicle inspected.  
If “No Video Signal Available” is indicated in the display, there could be a  
problem with the camera. Have your vehicle inspected at your Toyota  
dealer.  
WARNING  
Always drive carefully confirming the safety of the rear and the sur-  
rounding conditions by looking directly with your eyes  
Reversing the vehicle by only looking at the screen is dangerous as it may  
cause an accident or a collision with an object. The rear view monitor is only  
a visual assist device when reversing the vehicle. The images on the screen  
may be different from the actual conditions.  
Do not use the rear view monitor under the following conditions  
Using the rear view monitor under the following conditions is dangerous and  
could result in injury or vehicle damage or both.  
Icy or snow-covered roads.  
Tire chains or a temporary spare tire is installed.  
The liftgate/trunk lid is not fully closed.  
The vehicle is on a road incline.  
Rear view monitor display precautions in cold temperatures  
When the display is cold, images may course across the monitor or the  
screen and may be dimmer than usual, which could cause difficulty in con-  
firming the surrounding conditions of the vehicle. Always drive carefully con-  
firming the safety of the rear and the surrounding conditions by looking  
directly with your eyes.  
YARIS_YARIS HATCHBACK_OM_OM99V59z_(U)  
246  
3-13. Rear View Monitor  
NOTICE  
Do not apply excessive force to the camera. The camera position and  
angle may deviate.  
Do not disassemble, modify, or remove it as it may no longer be water-  
proof.  
The camera cover is made of plastic. Do not apply degreasing agents,  
organic solvents, wax, or glass coating agents to the camera cover. If any  
are spilled on the cover, wipe off with a soft cloth immediately.  
Do not rub the camera cover forcefully with an abrasive or hard brush. The  
camera cover or lens may be scratched which might affect the images.  
Rear View Parking Camera Location  
4-Door  
5-Door  
Rear View Parking Camera  
Rear View Parking Camera  
Switching to the Rear View Monitor Display  
Shift the shift lever to R with the ignition switched ON to switch the dis-  
play to the rear view monitor display.  
When the shift lever is shifted from R to another shift lever position, the  
screen returns to the previous display.  
YARIS_YARIS HATCHBACK_OM_OM99V59z_(U)  
247  
3-13. Rear View Monitor  
Displayable Range on the Screen  
The images on the screen may be different from the actual conditions.  
Screen display  
Trunk lid  
3
Bumper  
Actual view  
Object  
YARIS_YARIS HATCHBACK_OM_OM99V59z_(U)  
248  
3-13. Rear View Monitor  
The displayable range varies depending on the vehicle and road conditions.  
The displayable range is limited. Objects under the bumper or around the  
bumper ends cannot be displayed.  
The distance appearing in the displayed image is different from the actual  
distance because the rear view parking camera is equipped with a specific  
lens.  
Some optionally installed vehicle accessories may be picked up by the cam-  
era. Do not install any optional parts that can interfere with the camera view,  
such as illuminating parts or parts made of reflective material.  
It may be difficult to see the display under the following conditions, however,  
it does not indicate a malfunction.  
• In darkened areas.  
• When the temperature around the lens is high/low.  
• When the camera is wet such as on a rainy day or during periods of high  
humidity.  
• When foreign material such as mud is stuck around the camera.  
• When the camera lens reflects sunlight or headlight beams.  
Image display may be delayed if the temperature around the camera is low.  
YARIS_YARIS HATCHBACK_OM_OM99V59z_(U)  
249  
3-13. Rear View Monitor  
Viewing the Display  
Guide lines which indicate the width of the vehicle (yellow) are dis-  
played on the screen as a reference to the approximate width of the  
vehicle in comparison to the width of the parking space you are about  
to back into.  
Use this display view for parking your vehicle in a parking space or  
garage.  
1
Vehicle width guide lines (yel-  
low)  
These guide lines serve as a  
reference to the approximate  
width of the vehicle.  
3
2
Distance guide lines  
These guide lines indicate the  
approximate distance to a point  
measured from the vehicle’s  
rear (from the end of the  
bumper).  
The red and yellow lines indicate the points about 19 in. (500 mm)  
for the red line and 39.3 in. (1000 mm) for the yellow lines from the  
rear bumper (at the center point of each of the lines).  
WARNING  
The guide lines on the screen are fixed lines. They are not synced to the  
driver’s turning of the steering wheel. Always be careful and check the area  
to the vehicle’s rear and the surrounding area directly with your eyes while  
backing up.  
YARIS_YARIS HATCHBACK_OM_OM99V59z_(U)  
250  
3-13. Rear View Monitor  
Rear View Monitor Operation  
The operation of the rear view monitor when reversing the vehicle var-  
ies depending on the traffic, road, and vehicle conditions. The amount  
of steering and the timing also varies depending on conditions, so  
confirm the surrounding conditions directly with your eyes and steer  
the vehicle in accordance with the conditions.  
Be well aware of the above cautions prior to using the rear view moni-  
tor.  
1
Shift the shift lever to R to switch the display to the rear view moni-  
tor display.  
2
Confirming the surrounding conditions, reverse the vehicle.  
(Display condition)  
(Vehicle condition)  
3
4
After your vehicle begins entering the parking space, continue  
backing up slowly so that the distance between the vehicle width  
lines and the sides of the parking space on the left and right are  
roughly equal.  
Continue to adjust the steering wheel until the vehicle width guide  
lines are parallel to the left and right sides of the parking space.  
YARIS_YARIS HATCHBACK_OM_OM99V59z_(U)  
251  
3-13. Rear View Monitor  
5
Once they are parallel, straighten the wheels and back your vehicle  
slowly into the parking space. Continue checking the vehicle’s sur-  
roundings and then stop the vehicle in the best possible position. (If  
the parking space has division lines, check whether the vehicle  
width guide lines are parallel to them.)  
(Display condition)  
(Vehicle condition)  
3
6
When the shift lever is shifted from R to another shift lever position,  
the screen returns to the previous display.  
Images displayed on the monitor from the rear view parking camera are  
reversed images (mirror images).  
Because there may be a difference between the displayed image, such as  
indicated below, and the actual conditions when parking, always verify the  
safety at the rear of the vehicle and the surrounding area directly with your  
eyes.  
• In the image of the parking space (or garage) displayed below, even  
though the back end and distance guide lines appear parallel in the mon-  
itor, they may not actually be parallel on the ground.  
YARIS_YARIS HATCHBACK_OM_OM99V59z_(U)  
252  
3-13. Rear View Monitor  
• When parking in a space with a divi-  
sion line on only one side of the park-  
ing space, the division line and the  
vehicle width guide line may appear  
parallel on the monitor, but they may  
not actually be parallel on the ground.  
Variance Between Actual Road Conditions and Displayed Image  
Some variance occurs between the actual road and the displayed  
road. Such variance in distance perspective could lead to an accident.  
Note the following conditions that may cause a variance in distance  
perspective.  
When the vehicle is tilted due to the weight of passengers and  
load  
When the vehicle rear is lowered, the object displayed on the  
screen appears farther than the actual distance.  
Object  
Variance  
YARIS_YARIS HATCHBACK_OM_OM99V59z_(U)  
253  
3-13. Rear View Monitor  
When there is a steep grade behind the vehicle  
When there is a steep upgrade (downgrade) behind the vehicle, the  
object displayed on the screen appears farther (downgrade: closer)  
than the actual distance.  
Appears  
Appears  
farther than  
actual distance  
closer than  
actual distance  
A
B
B
A
3
Object at actual position  
Object on screen  
Object on screen  
Object at actual position  
A: Distance between the vehicle and object displayed on the screen.  
B: Actual distance between the vehicle and object.  
Three-dimensional object on vehicle rear  
Because the distance guide lines are displayed based on a flat sur-  
face, the distance to the three-dimensional object displayed on the  
screen is different from the actual distance.  
(Screen display)  
(Actual condition)  
1
2
3
Sensed distance on screen:  
>
>
2
3
1
Actual distance:  
>
=
YARIS_YARIS HATCHBACK_OM_OM99V59z_(U)  
254  
3-13. Rear View Monitor  
Picture Quality Adjustment  
Picture quality adjustment can be done while the shift lever is in  
reverse (R).  
There are four settings which can be adjusted including, brightness,  
contrast, tint, and color. When adjusting, pay sufficient attention to the  
vehicle surroundings.  
1
Select the  
icon on the screen to display the tabs.  
2
3
Select the desired tab item.  
Adjust the brightness, contrast, tint, and color using the slider.  
If you need to reset, press the reset button.  
4
Select the  
icon on the screen to close the tab.  
WARNING  
Always adjust the picture quality of the rear view monitor while the  
vehicle is stopped  
Do not adjust the picture quality of the rear view monitor while driving the  
vehicle. Adjusting the picture quality of the rear view monitor such as bright-  
ness, contrast, color, and tint while driving the vehicle is dangerous as it  
could distract your attention from the vehicle operation which could lead to  
an accident.  
YARIS_YARIS HATCHBACK_OM_OM99V59z_(U)