2008-2016 Volvo Xc70 SUV Instruments and controls -> Active main beam* User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Instruments and controls -> Active main beam* for Your Volvo Xc70 SUV Second Generation (2008-2016)

03 Instruments and controls  
Headlamps - adjusting headlamp pattern  
(p. 103)  
Active main beam*  
Active main beam function detects the head-  
lamp beams from oncoming traffic or the rear  
lights of vehicles in front, and switches the  
lighting from main beam to dipped beam. The  
lighting returns to main beam when the  
incoming light has stopped.  
Tunnel detection* (p. 95)  
Active main beam - AHB  
03  
Active main beam (Active High Beam - AHB)  
is a function which uses a camera sensor at  
the top edge of the windscreen to detect the  
headlamp beams from oncoming traffic or the  
rear lights of vehicles in front, and then  
switches from main beam to dipped beam.  
The function can also take streetlights into  
account.  
Stalk switch and knob for headlamp control in  
AUTO position.  
The function can start while driving in the  
dark when the car's speed is approx. 20 km/h  
(12 mph) or higher.  
The lighting returns to main beam about a  
second after the camera sensor no longer  
detects the headlamp beams from oncoming  
traffic or the rear lights from vehicles in front.  
Activate/deactivate AHB by moving the left-  
hand stalk switch towards the steering wheel  
to the end position and then releasing. Deac-  
tivation when main beam is on means that the  
lights are reset directly to dipped beam.  
Activating/deactivating  
AHB can be activated when the headlamp  
Car with analogue combined instrument  
panel  
control's knob is in position  
(provided  
that the function has not been deactivated in  
the menu system MY CAR, see MY CAR  
(p. 119)).  
When AHB is activated the  
minates in the instrument's information dis-  
play.  
symbol illu-  
When main beam is switched on the  
symbol also illuminates in the combined  
instrument panel.  
Car with digital combined instrument panel  
96  
* Option/accessory, for more information, see Introduction.  
03 Instruments and controls  
screen sensors are no longer blocked, the  
When AHB is activated the  
symbol  
IMPORTANT  
message extinguishes and the  
illuminates.  
symbol  
turns white in the instrument's information  
display.  
Examples of when manual switching  
between main and dipped beam may be  
required:  
When main beam is activated, the symbol  
turns blue.  
WARNING  
In heavy rain or dense fog  
AHB is an aid for using the optimum beam  
pattern when conditions are favourable.  
Manual operation  
In freezing rain  
In snow flurries or slush  
The driver always bears responsibility for  
manually switching between main and  
dipped beam when traffic situations or  
weather conditions so require.  
NOTE  
03  
In moonlight  
Keep the windscreen surface in front of the  
camera sensor free from ice, snow, mist  
and dirt.  
When driving in poorly lit built-up  
areas  
When the traffic ahead has weak light-  
ing  
Do not stick or attach anything to the  
windscreen in front of the camera sensor  
as this may reduce effectiveness or cause  
one or more of the systems dependent on  
the camera to stop working.  
If there are pedestrians on or beside  
the road  
If there are highly reflective objects  
such as signs in the vicinity of the road  
If the message Active main beam  
When the lighting from oncoming traf-  
fic is obscured by e.g. a crash barrier  
Temporary unavailable Switch manually is  
shown in the combined instrument panel's  
information display then you have to switch  
manually between main and dipped beam.  
However, the knob for headlamp control can  
When there is traffic on connecting  
roads  
On the brow of a hill or in a hollow  
In sharp bends.  
still remain in position  
applies if the message Windscreen sensors  
blocked See manual and the symbol  
are shown. The symbol goes out when  
. The same  
For more information on the limitations of the  
camera sensor, see Collision warning system*  
- camera sensor limitations (p. 237).  
these messages are shown.  
Related information  
Main/dipped beam (p. 95)  
AHB may be temporarily unavailable e.g. in  
situations with dense fog or heavy rain. When  
AHB becomes available again, or the wind-  
Light switches (p. 91)  
97  
* Option/accessory, for more information, see Introduction.  

Related Topics

Popular Owner Manuals