2008-2016 Volvo Xc70 SUV Instruments and controls -> Seats, rear User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Instruments and controls -> Seats, rear for Your Volvo Xc70 SUV Second Generation (2008-2016)

03 Instruments and controls  
Store setting  
Memory button  
Emergency stop  
Seats, rear  
If the seat accidentally begins to move, press  
one of the setting buttons for the seat or  
memory buttons in order to stop the seat.  
The rear seat backrest and the outer seat  
head restraints can be folded. The centre seat  
head restraint can be adjusted to suit the  
height of the passenger.  
Memory button  
Memory button  
Restarting to reach the seat position stored in  
the key memory is performed by pressing the  
unlock button on the remote control key. The  
driver's door must then be open.  
Head restraint, centre seat, rear  
Button for storing settings  
1. Adjust the seat and the door mirrors.  
03  
2. Press and hold button M while pressing  
button 1, 2 or 3 simultaneously. Hold the  
buttons depressed until the acoustic sig-  
nal is heard and text is shown in the com-  
bined instrument panel.  
WARNING  
Risk of crushing! Make sure that children  
do not play with the controls. Check that  
there are no objects in front of, behind or  
under the seat during adjustment. Make  
sure that none of the passengers in the  
rear seat is in danger of becoming trap-  
ped.  
The seat must be adjusted again before a  
new memory can be set.  
The setting for lumbar support is not stored.  
Heated/ventilated seats*  
For heated seats/ventilated, see Heated front  
seats* (p. 138) and Heated rear seat*  
(p. 138).  
Using a stored setting  
Adjust the head restraint according to pas-  
senger height so that the whole of the back of  
the head is covered if possible. Slide it up as  
required.  
Press one of the memory buttons 1-3 until the  
seat and the door mirrors stop. If the button  
is released, the movement of the seat and  
door mirrors will be interrupted.  
Related information  
Seats, front (p. 85)  
To lower the head restraint again, the button  
(located in the centre between the backrest  
and head restraint, see illustration) must be  
pressed in while the head restraint is pressed  
down carefully.  
Key memory* in remote control key  
All remote control keys can be used by differ-  
ent drivers to store the settings for the driv-  
er's seat and door mirrors18, see Remote  
control key - personalisation* (p. 169).  
Seats, rear (p. 87)  
18  
Only if the car is equipped with power seat with memory and retractable power rearview and door mirrors. The setting for lumbar support is not stored.  
}}  
87  
* Option/accessory, for more information, see Introduction.  
03 Instruments and controls  
||  
Lowering the rear seat backrest  
WARNING  
The centre seat head restraint must be in  
its lowest position when the centre seat is  
not used. When the centre seat is used,  
the head restraint must be correctly  
adjusted to the height of the passenger so  
that it covers the whole of the back of the  
head if possible.  
IMPORTANT  
There must be no objects on the rear seat  
when the backrest is to be folded down.  
The seat belts must not be connected  
either. Otherwise there is a risk of damag-  
ing the rear seat upholstery.  
03  
Manual lowering of the outer head  
restraints, rear seat  
The triple-section backrest can be folded in  
different ways.  
NOTE  
The front seats may need to be pushed  
forwards, and/or the backrests adjusted  
upwards, in order that the rear backrests  
can be fully folded forward.  
The left-hand section can be folded sepa-  
rately.  
If the centre backrest is being lowered -  
release and adjust the head restraint for  
the centre backrest, see the earlier sec-  
tion "Head restraint, centre seat, rear".  
The centre section can be folded sepa-  
rately.  
The right-hand section can only be folded  
together with the centre section.  
The outer head restraints are lowered  
automatically when the outer backrests  
are lowered. Pull up the backrest's lock-  
Pull the locking handle closest to the head  
restraint to fold the head restraint forward.  
If the entire backrest is to be folded then  
the different sections should be folded  
separately.  
The head restraint is moved back manually  
until a "click" can be heard.  
ing handle  
forward at the same time. A red indicator  
on the lock catch shows that the  
while folding the backrest  
WARNING  
backrest is no longer locked in place.  
The head restraints must be in locked  
position after being raised.  
Raising takes place in reverse order.  
88  

Related Topics

Popular Owner Manuals