03 Instruments and controls
the remote control key in the ignition
switch.
Overview
Key positions
The remote control key can be used to set the
vehicle's electrical system in different modes/
levels so that different functions are available;
see Key positions - functions at different lev-
els (p. 84).
2. Then press the remote control key in the
ignition switch up to its end position.
IMPORTANT
Foreign objects in the ignition switch can
impair the function or destroy the lock.
03
Do not press in the remote control key
incorrectly turned - hold the end with the
detachable key blade, see Detachable key
blade - detaching/attaching (p. 176).
Control panel in centre console. The figure is
schematic - the number of functions and layout
of the buttons both vary, depending on the
equipment selected and the market.
Remove the remote control key
Grip the remote control key and pull it out
from the ignition switch.
Navigation* - NAV, see separate supple-
ment (Sensus Navigation).
Ignition switch with remote control key extrac-
ted/inserted.
Audio and media - RADIO, MEDIA, TEL*,
see separate supplement (Sensus Info-
tainment).
NOTE
Function settings - MY CAR, see MY
CAR (p. 119).
For cars with the keyless start and lock
system* the remote control key does not
need to be inserted into the ignition switch
but can be stored in e.g. a pocket. For
more information on the keyless start and
lock system, see Keyless drive* (p. 179).
Internet-connected car - *, see sepa-
rate supplement (Sensus Infotainment).
Climate control system (p. 131).
Park assist camera* (p. 252) – CAM*.
Insert the remote control key
1. Hold the end of the remote control key
with the detachable key blade and insert
83
* Option/accessory, for more information, see Introduction.
English 
