03 Instruments and controls
Trip computer - analogue combined
instrument panel
Trip comp. opt.
Choose which trip computer should be
shown:
Controls
The information from the trip computer can
be shown in the combined instrument panel
and operated with the controls on the left-
hand stalk switch and with the combined
instrument panel's menu.
1. To ensure that no control is in the middle
of a sequence - reset them first with
two presses on RESET.
2. Turn the thumbwheel to browse between
the options and stop at the required
heading.
Checking and settings can be made immedi-
ately after the combined instrument panel is
automatically illuminated in connection with
unlocking. If none of the trip computer's con-
trols are actuated within approx. 30 seconds
after the driver's door has been opened then
the instrument extinguishes, after which
either key position II or engine starting is
required in order to operate the trip com-
puter.
03
The trip computer display in the combined
instrument panel can be shifted to another
option at any time during the journey. One of
the options means that no trip computer is
shown.
Information display and controls.
OK - opens the combined instrument
panel's menu, confirms messages or
menu selections.
Thumbwheel - browses between menu
options or trip computer options.
NOTE
If a warning message appears when the
trip computer is used then the message
must first be acknowledged before the trip
computer can be reactivated.
RESET - resets the current trip meter or
goes back out of the menu structure.
Acknowledge the message by briefly
pressing the indicator stalk OK button.
•
Trip computer heading in combined instrument Information
panel
Long press on RESET resets trip meter T1.
Long press on RESET resets trip meter T2.
Trip meter T1 and total dist.
Trip meter T2 and total dist.
•
•
}}
123
English 
