03 Instruments and controls
position between up and down in relation to
the scale selected.
Trip computer - trip statistics*
Trip statistics from the trip computer can be
shown in the centre console's screen and
provide a graphic overview of fuel consump-
tion.
Settings
Different settings can be made for trip statis-
tics in the menu system MY CAR - Trip
statistics.
Function
–
Open the menu system MY CAR (p. 119)
and select Trip statistics in order to see
the bar chart.
Reset when vehicle has been off for
minimum 4h - highlight the box by
selecting ENTER and go back out of the
menu by selecting EXIT. With this option
selected, all statistics are deleted auto-
matically after finishing driving and the
car has been stationary for more than
4 hours. Trip statistics start again from
zero the next time the engine is started.
•
03
Start new trip - ENTER is used to delete
all previous statistics, go back out of the
menu by selecting EXIT. If a new driving
cycle shall be started before 4 hours have
elapsed then the current period must first
be deleted manually with this option.
•
See also information on Eco guide (p. 72).
Trip statistics31
Related information
Trip computer (p. 121)
Each bar symbolises 1 km or 10 km driven
distance, depending on the scale selected -
the bar at the far right shows the value for the
current kilometre or 10 km.
•
Using the TUNE control, the scale for the
bars can be changed between 1 km and
10 km - the cursor on the far right changes
31
The figure is schematic - layout may vary depending on car model or updated software.
129
* Option/accessory, for more information, see Introduction.
English 
