Driving with the lane keeping system
Switching on and off
Depending on country, the lane keeping system is always switched on when the ignition is switched on. You can also
switch the lane keeping system on and off in the Assist systems menu on the Infotainment system and instrument
cluster and view the current system status there.
If there is a system fault, the lane keeping system can deactivate itself
automatically.
Speed range
When road lane markings can be detected, the lane keeping system is ready to intervene at speeds above around
60 km/h (around 35 mph) (system status active).
Displays
Fig. 1 On the display of the instrument cluster: Lane
keeping system displays (illustration).
1
2
3
Lane markings detected. System not regulating.
Lane markings detected. System regulates on the side displayed.
The system is not ready to perform control intervention. Depending on equipment, the white line is displayed as
a thin line or is not shown at all.
With some equipment levels, additional details about the road lane marking may also be shown on the instrument
cluster display, e.g. dotted lane markings.
Depending on the situation and the design of the instrument cluster, the following warning lamps light up:
or
or
System is active and ready to perform control intervention.
System controls (corrective steering intervention).
If no warning lamp lights up, the system is not ready to intervene(passive system status) or is switched off.
When the indicator is on, the system temporarily switches to passive mode to allow manual lane changes.
The system also switches to the passive state temporarily if the driver applies a heavy steering input to override the
corrective steering intervention.
232
English 
