Driver assist systems -> Operating the speed limiter via the multifunction steering wheel for Your Volkswagen Caddy SUV Fifth Generation (2020-2025)

Operating the speed limiter via the multifunction steering wheel  
Fig. 1 Left-hand side of the multifunction steering wheel.  
Switching on  
Press the  
button.  
No control yet.  
Starting control  
While driving, press the  
button.  
The current speed is stored as the maximum speed.  
Adjusting the speed  
You can adjust the stored speed:  
+ 1 km/h (1 mph):  
Press the  
button.  
button.  
- 1 km/h (1 mph):  
Press the  
+ 10 km/h (5 mph):  
Press the button. Pressing it for the first time switches to the next highest 10 km/h or 5 mph interval:  
- 10 km/h (5 mph):  
Press the button. Pressing it for the first time switches to the next lowest 10 km/h or 5 mph interval:  
Press and hold the or button to continuously change the stored speed.  
Cancelling control  
Press the  
or  
button.  
The speed is stored in the memory.  
Restarting control  
Press the  
button.  
213  
The speed limiter is automatically reactivated as soon as the current speed is lower than the stored speed.  
Switching off  
Press and hold the button.  
The speed limiter is switched off and the speed is deleted.  
Switching to the cruise control system or Adaptive Cruise Control (ACC)  
1. Press the  
button.  
2. Select the desired system on the instrument cluster display.  
The speed limiter is switched off.  
Depending on equipment, the button is either on the multifunction steering wheel or on the turn signal  
lever.  
Troubleshooting  
Speed limiter not available.  
The indicator lamp lights up yellow.  
Malfunction. Switch off the speed limiter and go to a qualified workshop.  
Regulation is automatically interrupted  
You have switched off Electronic Stability Control(ESC).  
The brakes have overheated. Leave the brakes to cool and check them again.  
If the problem persists, go to a qualified workshop.  
For safety reasons, the speed limiter does not fully deactivate itself until you release the accelerator once or switch  
the system off manually.  
Control cannot be started.  
The selected driving profile does not allow control to be started. Select a different driving profile and repeat the  
process.  
214