lk
FOX 2004 ➤
3 - Cyl. injection engine - Edition 12.2009
15 - Lambda probe -G39-
16 - Ignition coil 1 with final power stage -N70- , Ignition coil 2 with final power stage -N127- and Ignition coil 3
with final power stage -N291-
17 - Fuel distributor
18 - Cylinder 1 injector - N30- , Cylinder 2 injector -N31- and Cylinder 3 injector -N32-
1.2
Fuel injection components - remove and install
1 - Air filter set
❑ With filtering element.
❑ Disassemble and as‐
semble ⇒ page 90 .
❑ Remove and install
⇒ page 91 .
2 - Duct for air aspiration
3 - Injection valve harnesses.
4 - Connector
❑ Black, 2 poles
❑ From Cylinder 1 injec‐
tion valve -N30 - .
❑ From Cylinder 2 injec‐
tion valve - N31- .
❑ From Cylinder 3 injec‐
tion valve - N32- .
5 - 10 Nm
6 - Fuel distributor with injec‐
tion valves
❑ Remove and install
⇒ page 90 .
7 - 20 Nm
8 - 20 Nm
9 - Intake manifold
10 - Lambda probe -G39- , 50
Nm
❑ Lubricate only the
thread with High-tem‐
perature paste -G 052
112 A3- ; High-tempera‐
ture paste -G 052 112
A3- should not enter in the grooves on the Lambda probe -G39- body.
❑ Remove and install with the Socket set for Lambda probe -3337- .
11 - Connector
❑ Black, 4 poles.
❑ From Lambda probe -G39- .
12 - Lambda probe after the catalytic converter -G130 - , 50 Nm
❑ Lubricate only the thread with High-temperature paste -G 052 112 A3- ; High-temperature paste -G 052
112 A3- should not enter in the grooves on the Lambda probe -G130- body, after the catalytic converter.
❑ Remove and install with the Socket set for Lambda probe -3337- .
13 - Connector
❑ Black, 4 poles.
1. Injection system - repair
87
English 
