FOX 2004 ➤
3 - Cyl. injection engine - Edition 12.2009
1.6.1
Removal
– Pull off intake air duct -1-.
– Loosen spring clamp -2- with the VAS 5024A or Standart type
clamp pliers - VW 5162- and pull of air duct from the upper part
of filter air set.
– Remove the left bolt fastening the air filter set -arrow-.
– Tilt the Battery -A- cover forwards.
– Move the air filter set upwards.
– Remove air filter set.
1.6.2
Installation
– Seat air filter set on the rubber supports -arrows-.
– Press air filter set downwards onto the pins.
– Tighten fastening bolts to 8 Nm.
– Fasten the air duct with the spring clamp on the upper part of
the air filter set -2-.
– Install intake air duct on intake nozzle-1-.
lk
1.7
Safety measures
WARNING
Fuel system is under pressure! Wear protective goggles and
clothing, so as to avoid serious injuries and contact with the
skin. Before loosening tube junctions, place a cloth around the
union point. Then, eliminate pressure by pulling the flexible
tube off carefully.
To prevent injuries in people and/or destruction of the injection
and ignition system, take into consideration the following:
92
Rep. Gr.24 - Supply system - fuel injection
English 
