1. Press the
2. Use the arrow buttons
An arrow after the entry in the configuration menu links to a submenu.
or
button.
and
to select the corresponding multifunction display in the configuration menu.
3. Select Reset data in the submenu and confirm with the
button.
Vehicles without multifunction steering wheel:
1. Press and hold the
button.
Driving data in the Infotainment system
In addition to the display on the instrument cluster, driving data can also be displayed in the Infotainment system.
Selecting displays on the Infotainment system
You can select which driving data you want to display in the vehicle settings in the Infotainment system (→ Vehicle settings menu).
Average consumption
The average fuel consumption is displayed after around 300 m (around 984 ft).
Range
Approximate calculation of the distance in km (mi) that the vehicle can still travel under the current driving conditions.
Average speed
The average speed is displayed after around 100 m (around 328 ft).
Some settings can be saved in the user accounts of the personalisation function and can therefore change automatically when
the user account is changed .
WARNING
If the driver is distracted when driving, this can cause accidents and serious injuries. Operating the instrument cluster and
Infotainment system can distract you from the road.
● Drive with your full attention and with responsibility.
● Never operate the instrument cluster while the vehicle is in motion.
● Adjust all settings in the instrument cluster and Infotainment system only when the vehicle is stationary.
Settings can be made in the Service menu depending on the vehicle equipment.
Opening the Service menu in the digital instrument cluster Pro
1. Open the Range information profile.
2. Press and hold the
button on the multifunction steering wheel for approximately 4 seconds.
3. Navigate through the menu using the buttons on the multifunction steering wheel.
English 