Classic speedometer display as round instrument.
Rev counter
Classic rev counter display as round instrument.
The amount and scope of the displayed information may differ depending on the vehicle equipment.
When the ignition is switched off, a display appears showing information on the vehicle status, e.g. total mileage.
An additional secondary display can be configured in the middle of the round instrument in the Speed and Rev counter views.
Selecting secondary displays
Vehicles with multifunction steering wheel: The secondary displays can be configured or hidden independently of each other. Various
driving data, navigation information or information on audio playback or the mobile phone interface can be displayed in the secondary
displays. Select the secondary displays as follows:
1. Select the right or left secondary display area with the
2. Select the desired secondary display with the arrow buttons
3. Confirm the selection with the button.
or
button.
and .
Selecting secondary displays in the round instrument
Vehicles with multifunction steering wheel:
1. Select the desired secondary display with the arrow buttons
2. Confirm the selection with the button.
and
.
Vehicles without multifunction steering wheel:
1. To open the secondary displays, press the rocker switch → Fig. 2 2 at the top or bottom.
2. To scroll through the menus, press the rocker switch → Fig. 2 2 at the top or bottom.
3. To confirm the selected secondary display, press the button
→ Fig. 2 1 .
If warnings about malfunctions are displayed when the ignition is switched on, it may not be possible to adjust some settings
as described, or the information display may appear different. If the fault persists, go to a suitably qualified workshop.
Volkswagen recommends using an authorised Volkswagen repairer.
WARNING
Operating the instrument cluster and Infotainment system can distract you from the road. If the driver is distracted when driving, this
can cause accidents and serious or fatal injuries.
● Drive with your full attention and with responsibility.
● Never operate the instrument cluster while the vehicle is in motion.
● Adjust all settings in the instrument cluster and Infotainment system only when the vehicle is stationary.
Possible displays in the digital instrument cluster Basic
Depending on the equipment, various types of information can be displayed in the main and secondary display areas:
—Outside temperature display.
—Date and time.
—Digital speed.
—Driving data displays, e.g. Driving time/Distance covered.
English 