Compass display
If the Compass secondary display is activated, the current compass direction in which you are driving is shown as a blue arrow with a
representation of the vehicle in combination with a compass.
Radiator fan run-on
This display appears after the vehicle ignition has been switched off if the radiator fan is in after-run mode.
An after-run time of the radiator fan may be caused by the following:
—Exhaust gas treatment, e.g. during particulate filter regeneration.
—Active brake cooling after driving down hills.
—Dissipation of engine heat after vehicle operation under high loads, e.g. trailer towing.
Engine code
1. Open the Service menu (→ Service menu).
2. Select the Engine code menu option.
Navigation information
When route guidance is active, the Navigation information secondary displays shows an arrow to indicate the direction of travel.
An arrow after the entry in the configuration menu links to a submenu.
The submenu contains the home address and a list of recent destinations. You can start route guidance using the
button.
Telephone information
If the Telephone secondary display is activated and a mobile telephone is connected via Bluetooth®, the Bluetooth symbol is shown
in the digital instrument cluster Basic. In addition, the symbol shows the charge level of the mobile phone battery.
A list of recent calls is displayed in the submenu. The list can be used to call the contacts shown.
Selector lever position for automatic gearbox
The selected position and, depending on driving profile, the selected gear are displayed both on the selector lever and in the digital
instrument cluster Basic. The gear shift pattern is displayed in the digital instrument cluster Basic upon actuation of the brake or
selector lever.
Destination information
When route guidance is active, the Destination information secondary display shows the expected journey time and the distance to
the destination.
Some settings can be saved in the user accounts of the personalisation function and can therefore change automatically when
the user account is changed .
Some notifications in the digital instrument cluster may be overridden by sudden events, e.g. incoming telephone calls.
Depending on the vehicle equipment level, some settings and displays may also appear in the Infotainment system.
The start of the red zone on the dial indicates the maximum engine speed that may be used in each gear or gear selector position when
the engine is warm and after it has been run in properly.
English 