Get Driver information -> Multifunction display Guide for Volkswagen T-Roc SUV First Generation (2017-2025)

The multifunction display shows driving and fuel consumption data. Different driving data can be displayed depending on the vehicle

equipment level. The displayed driving data depends on the current driving behaviour, the vehicle condition, e.g. particulate filter

regeneration, and the current driving situation, e.g. urban driving. The driving data values are determined as average values over route

sections of varying length. This means that the currently displayed value may differ from the actual average value.

Since start recorder

The memory will be deleted if the journey is interrupted for more than 2 hours.

Since refuelling recorder

Display and storage of the collected driving and consumption values. The memory is deleted when the tank is refilled.

Long-term recorder

The recorder collects the driving values for up to 100 minutes driving time or 9,999.9 km (mi) distance covered. The memory is deleted

if one of these maximum values is exceeded. The maximum values vary depending on the instrument cluster version.

Multifunction display of digital instrument cluster Pro

The driving data is available in the context menu in the digital instrument cluster Pro.

Changing between the displays in the digital instrument cluster Pro

Vehicles with multifunction steering wheel:

1. Press the

button on the multifunction steering wheel.

Vehicles without multifunction steering wheel:

1. Press the rocker switch TRIP on the wiper lever.

Changing memory in the digital instrument cluster

Vehicles with multifunction steering wheel:

1. Press the

Vehicles without multifunction steering wheel:

1. Press the button on the wiper lever.

button on the multifunction steering wheel.

Deleting a driving data memory in the digital instrument cluster Pro

Vehicles with multifunction steering wheel:

1. Select the memory that you wish to delete.

2. Press the

button on the multifunction steering wheel.

Vehicles without multifunction steering wheel:

1. Select the memory that you wish to delete.

2. Press the

button on the wiper lever.

If you would like to know the distance that you have driven in one day, clear the Long-term recorder before you start your

journey and read the value at the end of the day.

Adjustable speed warning

An individual speed warning can be adjusted as follows:

Vehicles with multifunction steering wheel:

1. Select the display Warning at --- km/h or Warning at --- mph.

2. Press the

3. Set the speed within approximately 5 seconds using the

press the button or simply wait a few seconds.

The speed is now saved and the warning is activated.

4. To deactivate, press the button again.

button on the multifunction steering wheel to save the current speed and activate the warning.

and arrow buttons on the multifunction steering wheel. Then

The stored speed will be deleted.

Vehicles without multifunction steering wheel:

1. Select the display Warning at --- km/h or Warning at --- mph.

2. Press the button on the wiper lever to save the current speed and activate the warning.

3. Within approximately 5 seconds, set the speed using the rocker switch TRIP on the wiper lever. Then press the

or simply wait a few seconds.

button

The speed is now saved and the warning is activated.

4. To deactivate, press the

button again.

The stored speed will be deleted.

The warning can be set for speeds from 30 km/h (18 mph) to 250 km/h (155 mph).

Depending on country, a single acoustic warning will sound at speeds faster than around 80 km/h (around 50 mph) and a continuous

acoustic warning from around 120 km/h (around 75 mph). The yellow

This warning is a legal requirement and cannot be changed.

indicator lamp also appears in the instrument cluster display.

Multifunction display of the digital instrument cluster Basic

The driving data is available in the secondary display area in the digital instrument cluster Basic.

Multifunction display in the digital instrument cluster Basic

Vehicles with multifunction steering wheel:

1. Select the right or left secondary display area with the

2. Select the desired multifunction display with the arrow buttons

3. Confirm the selection with the button.

button.

and

Vehicles without multifunction steering wheel:

1. To open the secondary displays, press the rocker switch on the wiper lever at the top or bottom.

2. To browse through the menus, press the rocker switch up or down.

3. To confirm the selected driving data display, press the

button.

Resetting a multifunction display in the digital instrument cluster Basic

Vehicles with multifunction steering wheel:

1. Press the

2. Use the arrow buttons

An arrow after the entry in the configuration menu links to a submenu.

button.

and

to select the corresponding multifunction display in the configuration menu.

3. Select Reset data in the submenu and confirm with the

button.

Vehicles without multifunction steering wheel:

1. Press and hold the

button.

Driving data in the Infotainment system

In addition to the display on the instrument cluster, driving data can also be displayed in the Infotainment system.

Selecting displays on the Infotainment system

You can select which driving data you want to display in the vehicle settings in the Infotainment system (→ Vehicle settings menu).

Average consumption

The average fuel consumption is displayed after around 300 m (around 984 ft).

Range

Approximate calculation of the distance in km (mi) that the vehicle can still travel under the current driving conditions.

Average speed

The average speed is displayed after around 100 m (around 328 ft).

Some settings can be saved in the user accounts of the personalisation function and can therefore change automatically when

the user account is changed .

WARNING

If the driver is distracted when driving, this can cause accidents and serious injuries. Operating the instrument cluster and

Infotainment system can distract you from the road.

● Drive with your full attention and with responsibility.

● Never operate the instrument cluster while the vehicle is in motion.

● Adjust all settings in the instrument cluster and Infotainment system only when the vehicle is stationary.

Settings can be made in the Service menu depending on the vehicle equipment.

Opening the Service menu in the digital instrument cluster Pro

1. Open the Range information profile.

2. Press and hold the

button on the multifunction steering wheel for approximately 4 seconds.

3. Navigate through the menu using the buttons on the multifunction steering wheel.

Driver information -> Multifunction display for Your Volkswagen T-Roc SUV First Generation (2017-2025)

Related Topics

Driver information

Popular Owner Manuals

Latest Owner Manuals