Advertisement

Advertisement

Driver information -> Operating the digital instrument cluster Pro for Your Volkswagen T-Roc SUV First Generation (2017-2025)

Right side of the multifunction steering wheel: operating the  
digital instrument cluster Pro (illustration).  
On the right of the steering column: buttons on the wiper  
lever (illustration).  
There are no buttons on the wiper lever in vehicles equipped with a multifunction steering wheel. The digital instrument cluster Pro is  
then operated only with the buttons on the multifunction steering wheel. The functions of the buttons on the multifunction steering  
wheel depend on the vehicle equipment.  
Vehicles with multifunction steering wheel: If any priority 1 warnings are displayed, you will be unable to open any menus (→ Warning  
and information messages). You can confirm and hide some warnings using the  
→ Fig. 1 , .  
button on the multifunction steering wheel  
Vehicles without multifunction steering wheel: If any priority 1 warnings are displayed, you will be unable to open any menus  
(→ Warning and information messages). Some warnings can be confirmed and hidden with the  
button → Fig. 2 1 .  
Opening a menu or information display  
Vehicles with multifunction steering wheel:  
1. Switch on the ignition.  
2. If a message or the vehicle pictogram is displayed, press the  
button, several times if required.  
3. Press the or button to display a menu or browse through a menu.  
4. To open the displayed menu or information display, press the  
automatically after a few seconds.  
button or wait until the menu or information display opens  
Vehicles without multifunction steering wheel:  
1. Switch on the ignition.  
2. If a message or the vehicle pictogram is displayed, press the button  
→ Fig. 2 1 , several times if required.  
3. To access the menu selection or to return from a menu or an information display to the menu selection, hold down the rocker  
switch → Fig. 2 2 .  
4. To browse through the menus, press the rocker switch up or down.  
5. To open the displayed menu or information display, press the button  
information display opens automatically after a few seconds.  
→ Fig. 2 1 or wait until the menu or  
Changing settings in menus  
Vehicles with multifunction steering wheel:  
1. Press the arrow button  
A frame appears around the selected option.  
2. Press the button to make the required changes.  
A tick indicates that the relevant function is switched on.  
or  
in the displayed menu until the required menu selection is marked.  
3. To return to menu selection, press the  
or  
button.  
Vehicles without multifunction steering wheel:  
1. In the displayed menu, press the rocker switch → Fig. 2 2 at the top or bottom until the desired menu selection is marked.  
A frame appears around the selected option.  
2. Press the button  
→ Fig. 2 1 to make the desired changes.  
A tick indicates that the relevant function is switched on.  
3. Select the menu option Back or hold down the rocker switch → Fig. 2 2 to return to the menu selection.  
VIEW button on the multifunction steering wheel  
The button  
allows you to change between the classic view of the round instruments, the large view without information profiles  
and the extended view with highlighted information profiles. The classic view shows the large round instruments on the right and left  
and the selected information profile in the middle.  
1. To select a profile from the list of default information profiles, press and hold the  
button:  
Classic  
View without information profile.  
Automatic  
The information profiles adapt to the selected driving profile. Only for vehicles with driving profile selection.  
Memory entry 1  
Individual selection of the information profiles.  
Memory entry 2  
Individual selection of the information profiles.  
Memory entry 3  
Only for vehicles with navigation system fitted at the factory.