Get Driver information -> Lap timer in the Infotainment system Guide for Volkswagen T-Roc SUV First Generation (2017-2025)

Stop!

Active timing is interrupted. This will not end the lap.

Continue

Paused timing resumes.

Split time:

A split time will be displayed for approximately 5 seconds. Active timing continues parallel to this.

New lap

Timing of the current lap will then be interrupted and a new lap will begin. The time of the completed lap will be carried over to

the statistics.

Abort lap

The timing is ended and disregarded. The current lap is not entered into the statistics.

End

Timing is ended. The lap is entered into the statistics.

Statistics menu:

Back

Return to the previous menu.

Reset

This resets all stored statistics data.

In the menu Statistics, the lap times most recently achieved are shown. If the maximum number of 99 laps or the maximum time of 99

hours, 59 minutes and 59 seconds has been reached, new timing can only be started after the statistics have been reset.

WARNING

If the driver is distracted, this can cause accidents and serious injuries. Operating the lap timer can distract you from the road.

● Adjust the lap timer settings and open statistics only when the vehicle is stationary.

● When the vehicle is in motion, use the lap timer only in driving situations which are easy to control.

On the Infotainment system display: lap timer with stopwatch, function button and lap times.

Function button on the Infotainment system display: time

measurement for paused, current and completed lap.

Stopwatch.

Function button with current lap time.

Stored lap times.

Start or continue time measurement. This is possible only when the ignition is switched on. Tap Start to start time measurement.

Time measurement starts automatically as soon as the vehicle moves forwards. A new first lap can be started when the data in

the statistics has been reset.

Cancel current lap. The lap time is deleted. --: --:--.-- is displayed in the statistics.

End time measurement.

Pause time measurement or cancel current lap when time measurement is running.

Start new lap. The last lap time is stored and a new lap starts. The overall time of the laps driven is shown in the statistics.

Display split time. The stopwatch stops for a few seconds and the split time is displayed.

10 Display statistics after ending or aborting time measurement: number of laps, overall time, fastest and slowest slaps, average

value of all lap times, all lap values. Tap Reset to reset the statistics.

A maximum of 99 laps and a maximum time of 99 hours, 59 minutes and 59 seconds can be recorded. If one of these limits has

been reached, the data in the statistics must be deleted before a further time measurement.

Opening the lap timer

1. Press the

press the

tap the

button or function button, depending on version.

button or function button.

function button.

2. Tap the Vehicle function button.

: tap the Auto function button.

3. Tap the Selection function button.

4. Tap the Sport function button.

The performance monitor is displayed.

5. Tap one of the arrow buttons in the performance monitor to switch to the lap timer.

You can change between the lap timer and performance monitor at any time using the arrow buttons.

Measuring lap times

The stopwatch measures the lap time in two areas:

The red needle and the numerical value in the centre show the running time in seconds. The smaller display in the inner area shows

minutes and hours.

The display on the right side shows the current lap time with an accuracy of one hundredth of a second. There is no difference between

the stopwatch and lap times if there are not yet any laps with split times stored in the lap timer.

WARNING

If the driver is distracted, this can cause accidents and serious injuries. Operating the lap timer can distract you from the road.

● Adjust the lap timer settings and open statistics only when the vehicle is stationary.

● When the vehicle is in motion, use the lap timer only in driving situations which are easy to control.

On the Infotainment system display: performance monitor.

Display areas.

Arrow buttons for changing to the lap timer.

The performance monitor is a display for sporty driving. The digital instruments display real-time values for engine power,

temperature and acceleration that are determined by sensors on the vehicle. This provides the driver with an overview of driving

dynamics.

Opening the performance monitor

1. Press the

button or function button on the Infotainment system, depending on version.

2. Tap the Vehicle function button.

3. Tap the Selection function button.

4. Tap the Sport function button.

If you would like to switch between the performance monitor and the lap timer, tap one of the arrow buttons on the left and right

above the instruments → Fig. 1 2 .

Driver information -> Lap timer in the Infotainment system for Your Volkswagen T-Roc SUV First Generation (2017-2025)

Related Topics

Driver information

Popular Owner Manuals

Latest Owner Manuals