Get Lights -> Interior lighting Guide for Volkswagen Touareg SUV Third Generation (2018-2025)

Curve light

There is a fault in the dynamic bend

When the lights are switched on, the intensity of

the illumination of the instruments, controls

and ambient lighting can be infinitely adjusted

by turning the dimmer → fig. 110 .

lighting. Contact a specialist workshop.

The dynamic bend lighting does not work when

the travel mode is activated → p. 134.

– Press the adjuster; the adjuster will jump out

for adjustment.

If the bend lighting is faulty, a message appears

in the instrument cluster display. Contact a

specialist workshop.

– Set the desired intensity and reinsert the

dimmer.

The illumination of the instruments (needles and

scales) is on when the lights are on.

Dynamic High Beam Assistant

There is a fault in the Dynamic Light

Assist system. Contact

workshop

The lighting is switched off and the ignition is

switched on. As ambient brightness decreases,

the illumination of the scales is automatically

dimmed and eventually switched off

completely. This function is intended to remind

the driver to switch on the dipped beam in good

time,

specialist

→

p. 131.

In the following situations, the dynamic high

beam assistant behaves like a normal high

beam assistant and switches the high beam on

and off automatically:

e.g. when going through a tunnel.

– If the dynamic curve light is deactivated.

If the travel mode is activated → p. 134.

–

Interior lighting

Illumination of instruments and

controls

Fig. 110 Next to the steering wheel: dimmer for

instrument and control lighting.

Light

135

Interior and reading lights and ambient lighting

Fig. 111 In the passenger compartment: ambient lighting zones.

Switch the interior light on and off.

To activate the ambient lighting, briefly press

the button on the console of the vehicle.

The interior lamps are switched on

automatically when the vehicle is

unlocked, a door is opened or the key is

removed from the ignition switch.

Switch the reading light on or off.

The ambient lighting is switched on

automatically:

– When unlocking the vehicle.

–

OR: when opening a door.

Switching the ambient lighting on and off

→ page 136.

– OR: by removing the key from the ignition

lock.

Glovebox and luggage compartment light

After switching on the ignition or starting the

engine, the ambient lighting is dimmed and

provides indirect lighting.

When the glovebox or tailgate is opened and

closed, a light is automatically switched on or

off.

The intensity of the illumination can be infinitely

adjusted in the infotainment system.

ment.

Ambient lighting

When the ambient lighting fig. 111 is switched

on, the following areas are indirectly

illuminated:

CAR

– Press the

infotainment button.

Settings

function button .

Light and visibility

– Select the menu option

Interior light with ambient light

Front and rear door handles

Ambient Lighting

– Press function button

to select that option.

Front and rear door trims

– To change the intensity of the illumination,

place your finger on the scroll button and

move the button without removing your

finger.

Front and rear door handles Front door

handles Front door holders

Rear centre console storage compartment

Front and rear footrest zones

or to

– OR: press the function button

move the scroll button progressively.

136

Instruction manual

Footrest area lighting

Ambient illumination of centre console

controls

The footwell lighting illuminates the driver's

and passenger's footwell when the position or

dipped beam is switched on.

The lights at the front of the headlining illuminate

the controls in the centre console from above

when the position light or low beam is switched

on. The intensity is adjusted using the instrument

lighting dimmer → page 135.

The intensity of the lighting can be adjusted in

the infotainment system.

CAR

– Press the

infotainment button.

The lights go out when the vehicle is

locked or within a few minutes after the

key is removed from the ignition switch.

the ignition lock. This prevents the 12-volt battery

from discharging.

Settings

function button .

Light and visibility

– Select the menu option

– Select the desired submenu option by pressing

the-

Footrest area light

by pressing the function

button

To switch on a reading light that has been

switched on, the

Ambient lighting

If the device is already switched off

– To change the intensity of the illumination,

place your finger on the scroll button and

move the button without removing your

finger.

the key twice

automatically, press

for

–

OR: press the function button

move the scroll button progressively

Light

137

Lights -> Interior lighting for Your Volkswagen Touareg SUV Third Generation (2018-2025)

Related Topics

Lights