WARNING
Lights
Incorrect use of turn signals, not using them
or forgetting to turn them off can confuse
other road users. This can lead to accidents
and serious injury.
Turn signals
Switching the indicators on and off
● Always signal lane changes and
overtaking and turning manoeuvres in
good time by means of intermi- tents.
● Switch off the indicator after lane
changing, overtaking and turning
manoeuvres have been completed.
Emergency flashers also work with the
ignition switched off
p. 84.
→
Fig. 106 On the left-hand side of the steering
column: Indicator and indicator lever.
Lighting
– Switch on the ignition.
– Move the indicator lever and high beam
lever from the centre position to the desired
position:
Switching lights on and off
A
B
The right-hand indicator is switched on.
The left-hand indicator is switched on.
– Move the lever to the basic position to
disengage the indicator.
If an acoustic signal does not sound when the
indicators are switched on, take the vehicle to a
specialist workshop and have it checked.
Fig. 107 Next to the steering wheel: light control
(one variant).
Comfort indicators
To use the comfort indicator, move the
indicator and hazard warning light lever up or
down only to the point where it offers resistance
and then release it. The indicator flashes three
times.
Switch on the lights
– Switch on the ignition.
– Turn the light control knob to the
corresponding position:
Automatic dipped beam switching: The
dipped beam is switched on and off
To disengage the comfort indicator ahead of
time, immediately move the lever in the opposite
direction to the point where it offers resistance
and release it.
ambient
,
automatically depending on
and weather →
brightness
→
p. 130.
The comfort function of the direction indicators
Position light and daytime running lights on.
is
can be deactivated in a specialist
workshop.
The symbol on the control unit lights up.
of in green.
Low beam on.
128
Instruction manual
English 
