If additional modules, units, etc. are to be attached to the
chassis, it is required to fix them with brackets which are welded
to the side rail in the neutral zone. If it cannot be avoided to
screw them directly on the frame, it is required that the rails
are executed as hollow profiles on which also distance bushes are
to be welded.
Note:
• General instructions on chassis modifications
• Drilling at the chassis frame
If attachments are to be added or to be installed, it is required
to adhere to the instructions of the relevant
module/unit/equipment manufacturers.
Note: Subject to errors and technical amendments. The electronic
version of the body guidelines is the decisive source of up-to-date data on body guidelines
(online body
guidelines). Data status August 2007
29
English 