Advertisement

Advertisement

EASE OF USE and COMFORT -> Front seats for Your Citroen Berlingo SUV Second Generation (2008-2018)

Seats  
Forwards/backwards  
Seat height (driver)  
Lift the bar and slide the seat forwards  
or backwards.  
To raise the seat, pull the control  
upwards then take your weight off the  
seat cushion.  
To lower the seat, pull the control  
upwards then push on the seat  
cushion.  
FRONT SEATS  
Seat backrest angle  
The following adjustments are  
available:  
With your back pressed against the  
seat backrest, move the lever forwards  
and set the required angle.  
4
Seats  
Adjustable armrest  
To access the vertical position, raise  
the armrest until it locks.  
Lower the armrest to return it to a  
position for use.  
To remove the armrest, press the  
release button from the vertical position  
and move aside the armrest.  
To put the armrest back in place, clip it  
in the vertical position.  
If the vehicle is fitted with the additional  
console and an armrest, to fold the  
passenger seat to the table position  
remove the console or the armrest.  
Head restraint height  
To raise the head restraint, slide it vertically  
upwards.  
To lower the head restraint, press the  
button and slide the head restraint  
vertically downwards.  
Front heated seats control  
Each front seat may be fitted with a  
control located on the side part of the  
cushion.  
Press to switch on the cushion heating.  
Press again to switch it off.  
The adjustment is correct when the upper  
edge of the head restraint is level with the  
top of the head.  
To remove the head restraint, press the  
button and pull the head restraint upwards.  
To re-install the head restraint, engage  
the rods in the holes making sure they are  
aligned with the seat back.  
Never drive with the head  
restraints removed; they must be  
in place and correctly adjusted.