Advertisement

Advertisement

EASE OF USE and COMFORT -> Steering mounted controls (Lighting) for Your Citroen Berlingo SUV Second Generation (2008-2018)

Steering mounted controls  
Lighting off  
Automatic illumination of  
headlamps  
Sidelamps  
Dipped beam (green)  
Main beam (blue)  
Dipped beam/main beam change  
Pull the stalk fully towards you.  
DIRECTION INDICATORS  
Direction indicators  
LIGHTING  
Front and rear lighting  
Left: downwards passing the  
point of resistance.  
Right: upwards passing the  
point of resistance.  
Selection is by turning this Lighting-on audible warning  
ring.  
On switching off the ignition, all of the  
lamps turn off, except dipped beam if  
automatic guide-me-home lighting has  
been activated.  
To activate the lighting  
"Motorway" function  
control, turn this ring to  
the lighting off position "0"  
then to the selection of  
your choice.  
Checking by means of the indicator  
lamps in the instrument panel is  
described in the "Instruments and  
controls" section of chapter 3.  
Press the control up or down to flash  
the corresponding direction indicator  
three times.  
On opening the driver's door, there is  
an audible warning if you have left the  
lighting on.  
Steering mounted controls  
If the user does not operate any  
equipment for 30 minutes, the  
Economy mode engages to avoid  
discharging the battery. Electrical  
functions are put on standby and the  
battery warning lamp flashes.  
In clear weather or in rain, both day  
and night, rear foglamps dazzle and  
their use is prohibited.  
Automatic illumination of headlamps  
The sidelamps  
and dipped beam  
headlamps switch  
on automatically if  
the light is poor, or  
Sidelamp operation is not affected by  
Economy mode.  
Do not forget to switch them off  
when they are no longer needed.  
Operation of the automatic illumination  
of headlamps switches off the rear  
foglamps, but the front foglamps  
remain on.  
during operation of the windscreen  
wipers. They switch off as soon as the  
light becomes bright enough or the  
windscreen wipers stop.  
Refer to chapter 8, "Battery  
section".  
This function is not compatible with  
daytime running lamps.  
Front and rear foglamps  
They operate with the sidelamps and  
dipped beam headlamps.  
In foggy weather or in snow,  
the sunshine sensor may detect  
sufficient light.  
Rotate this ring forwards  
to switch on and  
rearwards to switch off.  
Their state is confirmed by  
the warning lamps in the  
instrument panel.  
As a consequence, the lighting  
will not come on automatically. If  
necessary, you must switch on  
LED DAYTIME RUNNING LAMPS  
the dipped beam headlamps manually.  
On starting the vehicle, in daylight the  
LED daytime running lamps come on  
automatically.  
If the sidelamps and headlamps are  
switched on manually or automatically,  
the daytime running lamps go off.  
Do not cover the sunshine sensor  
located on the windscreen, behind  
the mirror. It is used for the automatic  
illumination of headlamps and for the  
automatic rain sensitive wipers.  
Front foglamps (green,  
1st rotation of the ring  
forwards).  
Programming  
Activation  
Turn the ring to the AUTO position.  
The activation of this function is  
accompanied by a message in the  
screen.  
Rear foglamps (amber,  
2nd rotation of the ring  
forwards).  
For countries where exterior lighting by  
day is not a legal requirement, you can  
activate or deactivate the function via  
the configuration menu.  
To switch off the front and  
rear foglamps, turn the  
ring rearwards twice in  
succession.  
Deactivation  
Turn the ring forwards or rearwards.  
The deactivation of this function is  
accompanied by a message in the  
screen.  
4
Steering mounted controls  
The function is deactivated temporarily  
when you use the manual lighting  
control stalk.  
If the sunshine sensor  
does not function correctly,  
the lighting comes on  
accompanied by the service  
warning lamp, an audible  
signal and a message in the screen.  
Contact a CITROËN dealer or a  
qualified workshop.  
CORNERING LIGHTING  
With dipped or main beam headlamps,  
this function makes use of the beam  
from a front foglamp to illuminate the  
inside of a bend, when the vehicle  
speed is below 25 mph (approximately  
40 km/h) (urban driving, winding road,  
intersections, parking manoeuvres...).  
Guide-me-home lighting  
Keeping the dipped beam headlamps  
on temporarily with the ignition off,  
makes the driver's exit easier when the  
light is poor.  
HEADLAMP BEAM  
Switching on  
This function starts:  
The beam setting must be adjusted to  
suit the load in the vehicle.  
0 - No load.  
1 - Partial load.  
2 - Average load.  
3 - Maximum authorised load.  
-
when the corresponding direction  
indicator is switched on,  
Manual operation  
-
With the ignition off, "flash" the  
headlamps within one minute after  
switching off the ignition.  
or  
-
from a certain angle of rotation of  
the steering wheel.  
The guide-me-home lighting switches  
off automatically after a set time.  
Switching off  
The system does not operate:  
Initial setting is position 0.  
Travelling abroad  
If using your vehicle in a country  
that drives on the other side of the  
road, the headlamps must be adjusted  
to avoid dazzling on-coming drivers.  
-
below a certain angle of rotation of  
the steering wheel,  
above 25 mph (40 km/h),  
Automatic operation  
Activate the function via the  
vehicle configuration menu.  
-
-
when reverse gear is engaged.  
Programming  
The system is activated or deactivated  
in the vehicle configuration menu.  
The system is activated by default.  
Contact a CITROËN dealer or a  
qualified workshop.  
Refer to chapter 10, "Screen  
menu map" section.