Advertisement

Advertisement

EASE OF USE and COMFORT -> Steering mounted controls (Wipers) for Your Citroen Berlingo SUV Second Generation (2008-2018)

Steering mounted controls  
In the AUTO position, the windscreen  
wipers operate automatically and  
adapt their speed to the intensity of the  
rainfall.  
When not in AUTO mode, for the  
other positions, refer to the manual  
windscreen wipers section.  
Activation  
Press the control downwards.  
Activation of the function is  
accompanied by a message in the  
screen.  
The automatic rain sensitive  
windscreen wipers function must  
be reactivated by pressing the stalk  
downwards, if the ignition has been  
switched off for more than one minute.  
Deactivation  
Place the windscreen wipers stalk in  
position I, 1 or 2.  
WIPERS  
Deactivation of the function is  
accompanied by a message in the  
screen.  
In the event of malfunction of the  
automatic windscreen wipers, the  
windscreen wipers will operate in  
intermittent mode.  
Contact a CITROËN dealer or a  
qualified workshop to have the system  
checked.  
Whenever the ignition has been  
switched off for more than one minute,  
with the windscreen wiper stalk in  
position 2, 1 or I, the stalk must be  
reactivated.  
Manual wiping  
2
1
l
Fast wipe (heavy rain).  
Normal wipe (moderate rain).  
Intermittent wipe.  
Off.  
-
-
Move the stalk to any position.  
Return it to the desired position.  
0
â Single wipe  
(press downwards).  
In the Intermittent position, the wiping  
speed is in proportion to the vehicle  
speed.  
Automatic wipers  
When using an automatic car  
wash, switch off the ignition to  
avoid triggering the automatic  
wiping.  
Do not cover the rain sensor,  
located in the centre of the  
windscreen, behind the mirror.  
In winter, it is advisable to wait for the  
windscreen to completely clear of ice  
before operating the automatic wipers.  
4
Steering mounted controls  
Screenwash  
Pull the stalk towards you, the wash-  
wipe is accompanied by a timed sweep  
of the wipers.  
To top up the level, refer to the  
"Levels" section of chapter 7.  
Special position of the  
windscreen wipers  
In the minute following switching  
off of the ignition, any action on the  
stalk positions the wipers against the  
windscreen uprights.  
This action enables you to position  
the wiper blades for winter parking,  
cleaning or replacement.  
Rear wiper  
Rear screenwash  
Turn the ring to the first  
position.  
Turn the ring past the first  
Refer to the "Changing a windscreen  
wiper blade" section of chapter 8.  
position: the rear screenwash  
then the rear wiper operates  
for a fixed time.  
To park the wipers in their normal  
position after this has been done,  
switch on the ignition and move the  
stalk.  
In winter, in the event of a  
considerable amount of snow  
or ice, switch on the heated  
rear screen. Once the screen is  
clear, remove the snow or ice which  
has accumulated on the rear wiper  
blade. You can then operate the rear  
windscreen wiper.