Practical information
Recommendations for loading the
roof
This procedure requires the use of
a spanner supplied with the tools for
changing a wheel.
In all cases, the load must rest on
the non-slip bands provided for this
purpose and must not touch the roof or
the glazing of the roof.
MODUTOP ROOF BARS
These two longitudinal Modutop roof
bars can be removed.
Chapter 9, "Changing a wheel"
section.
The maximum authorised weight on
each roof bar is 35 kg.
-
-
Open the protective covers.
Slacken the four screws using the
spanner and remove them.
Turn the bars 90° placing the
-
hollow parts towards the front.
-
Refit the the 4 screws and tighten
them using the spanner.
Close the protective covers.
-
-
Use the strap passages A only to
secure the load firmly.
4
English 