Advertisement

Advertisement

EASE OF USE and COMFORT -> Trip computer for Your Citroen Berlingo SUV Second Generation (2008-2018)

Steering mounted controls  
When the range falls below 20 miles  
(30 km), dashes are displayed. After  
filling with at least 10 litres of fuel, the  
range is recalculated and is displayed  
when it exceeds 60 miles (100 km).  
If, whilst driving, dashes are displayed  
continuously in place of the digits,  
contact a CITROËN dealer.  
Current fuel consumption: only  
calculated and displayed above  
20 mph (30 km/h).  
Average fuel consumption: this is the  
average fuel consumption since the  
last trip computer zero reset.  
TRIP COMPUTER  
Distance travelled: calculated since  
the last trip computer zero reset.  
Each press of the button, located at  
the end of the wiper stalk, displays the  
different trip computer information in  
turn, depending on the screen.  
Reset  
When the required trip is displayed,  
press the control for more than  
two seconds.  
Distance remaining to the  
destination: calculated with reference to  
the final destination, entered by the user.  
If guidance is activated, the navigation  
system calculates it as a current value.  
The "vehicle" tab with the range,  
current fuel consumption and the  
remaining distance to run.  
A few definitions  
Range: displays the distance which  
can travelled with the remaining fuel  
detected in the tank, basd on the  
average consumption over the last few  
miles (kilometres).  
The "1" tab (trip 1) with the average  
speed, the average fuel consumption  
and the distance travelled in trip "1".  
Average speed: this is the average  
speed calculated since the last trip  
computer zero reset (ignition on).  
This displayed value may vary  
significantly following a change in the  
vehicle speed or the relief of the route.  
The "2" tab (trip 2) with the same  
information for a 2nd trip.  
4